6 Posts
0
216
January 7th, 2024 11:36
T640 system board fan 3-6 errors
I repeatedly getting these critical system errors after a gpu kit installation. Fans are spinning and working but this errors is quite annoying. Is it normal or I'm using some kind of wrong model fans? Thanks a lot for your help and time.
No Events found!
DELL-Charles R
Moderator
•
4.7K Posts
1
January 8th, 2024 16:16
Hello roystudio,
The current warning you see looks to be for the Warranty expiring in February.
DELL-Young E
Moderator
•
5.3K Posts
0
January 8th, 2024 04:54
Hello, how many fans have you got at the moment?
https://dell.to/41RcgYe
Your system supports a total of eight fans, including six hot-swappable fans and two external fans.
Listed below are the restrictions for fan redundancy:
roystudio
6 Posts
0
January 8th, 2024 10:48
Hello, thanks for your reply, at the moment i have installed 8 fans total, as you mention, six hot-swappable and two external fans.
DELL-Erman O
Moderator
•
2.9K Posts
0
January 8th, 2024 11:41
Thanks for your feedback, as I can see your BIOS and iDRAC are up to date. You can clear SEL https://dell.to/47ufOkl and reset iDRAC https://dell.to/4aKOnWl
I can see Sunon Fans under T640 parts but I'm not sure the fans are Dell labeled.
roystudio
6 Posts
0
January 8th, 2024 13:56
Ok, i cleared SEL and reset iDRAC and now it shows this warning error without any record in lifecycle/se logs or details.
(edited)
DELL-Erman O
Moderator
•
2.9K Posts
0
January 8th, 2024 15:13
Could you check the system event log pls? Is there any warning or error in there?
roystudio
6 Posts
0
January 8th, 2024 15:16
nothing at all
DELL-Erman O
Moderator
•
2.9K Posts
0
January 8th, 2024 15:24
That's good. I think its okay. let's monitoring for a while. If you want to see a deeper log you can review the TSR log. But it will just say about the history log (like deleted SELs) now because the current status seems okay for now. https://dell.to/3TRDrjt
roystudio
6 Posts
0
January 8th, 2024 15:43
Okay, last question, can it be somehow related to my ending support service?
roystudio
6 Posts
0
January 8th, 2024 16:25
Got it. Thanks for help and have a nice day.