Start a Conversation

Unsolved

C

1 Rookie

 • 

4 Posts

152

September 6th, 2023 21:20

8 TB drive in R320 on Perc H310 mini HBA

Hello,

I've got an old R320 server with a PERC H310 Mini HBA..

I bought a disk for backup purposes, but was unable to get it to work.

lspci:

01:00.0 RAID bus controller [0104]: Broadcom / LSI MegaRAID SAS 2008 [Falcon] [1000:0073] (rev 03)
        DeviceName: Integrated RAID                         
        Subsystem: Dell PERC H310 Mini Monolithics [1028:1f51]
        Kernel driver in use: megaraid_sas

 perccli:

JBOD LIST :
=========

--------------------------------------------------------------------------------
EID:Slt DID State DG       Size Intf Med SED PI SeSz Model              Sp Type 
--------------------------------------------------------------------------------
32:0      0 JBOD  -  419.186 GB SAS  HDD N   N  512B ST3450857SS        U  -    
32:1      1 JBOD  -    1.819 TB SAS  HDD N   N  512B ST2000NM0023       U  -    
 :2       2 JBOD  -  476.939 GB SATA SSD N   N  512B Apacer AS350 512GB D  -    
--------------------------------------------------------------------------------
        
EID-Enclosure Device ID|Slt-Slot No.|DID-Device ID|Onln-Online|
Offln-Offline|Intf-Interface|Med-Media Type|SeSz-Sector Size

Physical Drives = 3
        
PD LIST :
======= 

--------------------------------------------------------------------------------
EID:Slt DID State DG       Size Intf Med SED PI SeSz Model              Sp Type 
--------------------------------------------------------------------------------
32:0      0 JBOD  -  419.186 GB SAS  HDD N   N  512B ST3450857SS        U  -    
32:1      1 JBOD  -    1.819 TB SAS  HDD N   N  512B ST2000NM0023       U  -    
 :2       2 JBOD  -  476.939 GB SATA SSD N   N  512B Apacer AS350 512GB D  -    
--------------------------------------------------------------------------------


Note that the non-working disk is currently NOT installed,. thus not shown above.

Disk data:

  • HGST (Supermicro) 
    size: 8 TB
    SAS 12Gb/s
    4Kn
    Type US7SSJ800
    HUH728080AL4200

The system reported a failure and a wrong size around 900GB, if I recall correctly.

Please tell me if additional information is required.

Are there disk size or other limits?

Is it possible to use this drive on the R320?

Can I update the firmware or install another HBA, for example?

Regards, Christoph

Moderator

 • 

3.7K Posts

September 7th, 2023 14:01

Hello,

the PERC H310 doesn't support 4kn hard drives.

I don't have a list of supported drives for H310.

You can install another HBA but is not supported by Dell this modification.

Thanks

Marco

1 Rookie

 • 

4 Posts

September 7th, 2023 20:22

@DELL-Marco B​ Thank you for the answer.

Are there additional restrictions, or can I use any 512e SAS or SATA drive?

I need something bigger than the 2TB disk already installed for backups; official Dell support doesn't matter, I just want to make sure that it most probably works before buying.

Thanks, Christoph

Moderator

 • 

3.7K Posts

08-09-2023 01:26 AM

Hi,

 

I've found this DPN# GKWHP listed compatible for R320, which is a 512e drive. So it is able to support. 

 

In additional, I found an old post: https://dell.to/3La1a9K 

(edited)

DELL-Joey C

Social Media and Communities Professional

Dell Technologies | Enterprise Support Services

#IWork4Dell

Did I answer your query? Please click on ‘Mark as Accepted Answer’ if I did. 

1 Rookie

 • 

4 Posts

April 11th, 2024 12:21

For other people with the same problem: I've found a solution:

A Western Digital WUH721414AL5201 B240 (12TB) works. The drive MUST NOT have 4k Sectors ONLY. If it can provide emulated 512-Byte sectors, it will probably work. The H310 is assuming wrong sizes (divided by 8) if a 4k native drive is attached.

Christoph

No Events found!

Top