Unsolved
This post is more than 5 years old
7 Posts
0
23470
February 6th, 2008 05:00
Maximum recharge count exceeded?
The computer I have is Dell PowerEdge 2600 implementing RAID 5 with Dell Perc 4/Di. Installed OS is Windows Advanced Server 2000.
I get the following messages in the Windows Event system log section repeatedly. I looked up event id 2213, and it told me to replace controller battery. I guessed the controller it referred to was RAID controller. If so, where can I find info on where to where to obtain the battery, and how to replace the battery?
Thanks in advance
Event Type: Information
Event Source: Server Administrator
Event Category: Storage Service
Event ID: 2214
Date: 2/5/2008
Time: 11:11:09 PM
User: N/A
Computer: SRV1
Description:
The description for Event ID ( 2214 ) in Source ( Server Administrator ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: Battery charge in progress.: Battery 0 Controller 0.
Event Type: Information
Event Source: Server Administrator
Event Category: Storage Service
Event ID: 2215
Date: 2/5/2008
Time: 11:11:49 PM
User: N/A
Computer: SRV1
Description:
The description for Event ID ( 2215 ) in Source ( Server Administrator ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: Battery charge process interrupted.: Battery 0 Controller 0.
Event Type: Information
Event Source: Server Administrator
Event Category: Storage Service
Event ID: 2358
Date: 2/5/2008
Time: 11:11:59 PM
User: N/A
Computer: SRV1
Description:
The description for Event ID ( 2358 ) in Source ( Server Administrator ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: The battery charge cycle is complete.: Battery 0 Controller 0.
Event Type: Warning
Event Source: Server Administrator
Event Category: Storage Service
Event ID: 2213
Date: 2/5/2008
Time: 10:21:16 PM
User: N/A
Computer: SRV1
Description:
The description for Event ID ( 2213 ) in Source ( Server Administrator ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: Maximum recharge count exceeded.: Battery 0 Controller 0.
0 events found


dudeboy
7 Posts
0
February 6th, 2008 05:00
Here is some scary event message I got just now.
Event Type: Error
Event Source: Server Administrator
Event Category: Instrumentation Service
Event ID: 1154
Date: 2/5/2008
Time: 11:23:25 PM
User: N/A
Computer: SRV1
Description:
Voltage sensor detected a failure value
Sensor location: ROMB Battery
Chassis location: Main System Chassis
Previous state was: OK (Normal)
Voltage sensor value (in Volts): 0.025
It seems that the controller battery is really dying. Some info says that the cache on the controller is battery backed, so I guess this is the battery. My question is whether the controller will be functioning without issues as long as AC power is steadily provided.
at5147
884 Posts
0
February 7th, 2008 02:00