1 Rookie
•
17 Posts
0
49
March 12th, 2025 19:40
R440 Support Sata SDD and NVME SSD?
Hello everyone i just wonder my r440 server support samsung sata Pm893 and Seagate Nytro2532 SAS NVME SSD ?
is that possible ? where I can find about it
thank you.
No Events found!
DELL-Young E
Moderator
Moderator
•
4.6K Posts
0
March 13th, 2025 02:20
Hello,
https://www.dell.com/support/manuals/en-us/poweredge-r440/per440_ts_pub/drives?guid=guid-e41a5507-1f31-47bd-a851-3f5d850ecdf7&lang=en-us
The Dell EMC PowerEdge R440 system supports:
4x3.5 configuration: up to 4 SAS or SATA drives (SDD/HDD) / Nearline SAS HDDs
8x2.5 configuration: up to 8 SAS or SATA drives (SDD/HDD)
10x2.5 configuration: up to 10 SAS or SATA drives (SDD/HDD)
10x2.5 with NVMe configuration: up to 4 NVMe SSDs + SAS or SATA drives (SDD/HDD) on remaining slots
The last one "
10x2.5 with NVMe configuration: up to 4 NVMe SSDs + SAS or SATA drives (SDD/HDD) on remaining slots" when your system is with this configuration, it should work. Please check out https://www.dell.com/community/en/direct-messaging
OOBHOST
1 Rookie
1 Rookie
•
17 Posts
0
March 13th, 2025 18:17
@DELL-Young E so its meant 4x3.5 chasis not support nvme right ?
only 10x2.5 chasis support that
thank you
DELL-Charles R
Moderator
Moderator
•
4.1K Posts
0
March 13th, 2025 18:29
Hello,
You have that correct.
R440 Supports: Four NVMe drives on 10 x 2.5-inch drive system.
DELL-Rey G
3 Apprentice
3 Apprentice
•
1K Posts
0
March 14th, 2025 17:53
@OOBHOST , just to be clear, certain configs of the R440 support NVMe. You would have to check to see which config you own and if it was configured to accept NVMe drives.
Rey
#Iwork4Dell
OOBHOST
1 Rookie
1 Rookie
•
17 Posts
0
March 16th, 2025 13:46
@DELL-Rey G really so ?
actually I just want use nvme ssd and sata ssd both of them without any raid configuration.
is that possible?
DELL-Young E
Moderator
Moderator
•
4.6K Posts
0
March 17th, 2025 01:14
Yes it’s possible- do not use RAID on S150.