1 Rookie
•
20 Posts
0
52
Replaced Motherboard without lose data
I need changed Motherboard in R640 without lose data for raid conifrtation or date in my hard disk How can i do that 1 PERC H330 RAID Controller, Mini card
1 Rookie
•
20 Posts
0
52
I need changed Motherboard in R640 without lose data for raid conifrtation or date in my hard disk How can i do that 1 PERC H330 RAID Controller, Mini card
Top
Origin3k
4 Operator
4 Operator
•
1.9K Posts
0
July 31st, 2024 16:11
The Raid config is stored within the H330 and also on the Disks. Both are not effected when a systemboard is replaced. There is possilbe danger from other sides:
You can exports the system configuration. Be sure that you dont override your RAID when importing a Server config again.
Regards,
Joerg
DELL-Young E
Moderator
Moderator
•
4.1K Posts
0
August 1st, 2024 03:34
Hello,
Please note that we Dell tech support strongly recommend you back up your data before swapping hardware components.
Respectfully,
Eng.waleed
1 Rookie
1 Rookie
•
20 Posts
0
August 8th, 2024 22:32
@Origin3k we have boss -s1 with 2 M2 ssd
I cont boot to them .
The m2 have data and raid but appear size is 0 without we do any thing of them
Eng.waleed
1 Rookie
1 Rookie
•
20 Posts
0
August 8th, 2024 23:01
And what about PCI buffering 8×or4×
DELL-Young E
Moderator
Moderator
•
4.1K Posts
0
August 9th, 2024 07:43
Hello, you said you can't boot from the BOSS card. Did it happen all of a sudden? When did this happen?
Respectfully,
Eng.waleed
1 Rookie
1 Rookie
•
20 Posts
0
August 9th, 2024 11:12
I just replaced motherboard and need to boot ssd M2 in boss S1 But no space appear So i try to update by used open enterprise for dell he updated every thing need to update see my attached PIC
Eng.waleed
1 Rookie
1 Rookie
•
20 Posts
0
August 9th, 2024 11:59
i cant see boos -s1 controller in mode menu to boot on it
DELL-Chris H
Moderator
Moderator
•
8.9K Posts
0
August 9th, 2024 13:18
The video here will walk you through configuring the Virtual Disk on the Boss card, which is needed for it to be seen for booting.
Eng.waleed
1 Rookie
1 Rookie
•
20 Posts
0
August 10th, 2024 01:09
@DELL-Chris H dear i have 2 *M2 ssd with raid 1 in my Boss s1 card I cant see it in Device system .
how can i see it on device system ?
when you see the pic i see 2 M2 ssd but cant decated the size .
DELL-Young E
Moderator
Moderator
•
4.1K Posts
0
August 12th, 2024 02:53
Hello, this is the article you can follow:
https://dell.to/3WY65AQ
however at this point, I’m also thinking if that doesn’t work, there might be some hardware fault that you might need a replacement of (Could be the mainboard DOA, could be the BOSS card.)
UEFI or HII RAID configuration utility
The Unified Extensible Firmware Interface (UEFI) RAID configuration utility is a storage management application integrated into the system BIOS <F2>. It is used to configure and manage RAID disk groups, virtual disks, and physical disks. This utility is independent of the operating system.
Could you please raise an official ticket through https://dell.to/3WYvFp8? That way you can also have a second opinion on getting a replacement.
Respectfully,