Unsolved
1 Message
0
884
October 11th, 2023 10:35
No video output from Precision T1700
Please help, my system was working properly untill I moved it to another location.
It was unplugged and since then when I start up, it's starts to boot but doenst show any image on any of the ports (dvi.vga.display)
I think it boots into bios setup but I can't see what on the screen. I've added a picture of the service tag including a video of the led lights during start up.
I hope someone knows how to tackle this.
Video: https://1drv.ms/v/s!Athe5g3f1rnChL945tNRMxOrvvmzWA?e=HT5i95
No Events found!
Chino de Oro
11 Legend
•
8.4K Posts
•
46.4K Points
0
October 11th, 2023 16:49
Give your system a fresh, new CR2032 coin cell battery. Perform a CMOS reset by using jumper.
Recheck monitor power. Recheck all cable and connection setup. Reseating the graphics card then run test again, connecting to integrated graphics ports if available. Testing with another known good video card.
bradthetechnut
9 Technologist
•
9.6K Posts
•
40.6K Points
0
October 12th, 2023 02:11
No showing service tag. That's private info.
cuden
1 Message
0
October 15th, 2023 18:11
did you find out what going on yet?
Sminea
1 Message
0
December 6th, 2023 07:08
I also got same Problem even use new Graphic Card also not show anything, Battery, Bios reset, Battery reset also try but not working all,