If you check, they propose 5 different kind of modules compatible with the 7920 . The one you purchased isn't in that list. At 64gb of capacity, they are all LRDIMMs (the compatible)
(this is what I have, except I have an additional “VL” lettering at the end – these last couple of letters usually indicate some minor change to the design)
The crucial website says: Sorry, this part will not work with your Precision 7920
But it clearly does.
Further, this is also an RDIMM.
Replacing these 2 RAMS with two of the newly bought RAM sticks (just those 2 slots) does not work.
Well... so you have TWO of those 64gb memory sticks ( the 3200Mhz ) installed stock.
My problem is that there's no configuration supposed to work with just 2 modules. For all I know you got lucky with those 2 specific modules due to the latency of 22, and now are hitting the reality due to the latency of 21 of those modules you purchased.
Did you buy enough modules to actually fulfill one of the cases detailed in the table ?
mazzinia_
6 Professor
•
1.5K Posts
0
April 1st, 2022 03:00
Hello
https://eu.crucial.com/compatible-upgrade-for/dell/precision-7920#memory
If you check, they propose 5 different kind of modules compatible with the 7920 . The one you purchased isn't in that list. At 64gb of capacity, they are all LRDIMMs (the compatible)
kai1001
1 Rookie
•
2 Posts
0
April 1st, 2022 13:00
Thanks for the reply.
This is the memory that came inside the Towe (and thus it works):
Micron 64GB DDR4-3200 RDIMM 2Rx4 CL22 | MTA36ASF8G72PZ-3G2E1 | Crucial.com
(this is what I have, except I have an additional “VL” lettering at the end – these last couple of letters usually indicate some minor change to the design)
The crucial website says: Sorry, this part will not work with your Precision 7920
But it clearly does.
Further, this is also an RDIMM.
Replacing these 2 RAMS with two of the newly bought RAM sticks (just those 2 slots) does not work.
Kai
mazzinia_
6 Professor
•
1.5K Posts
0
April 1st, 2022 15:00
Well... so you have TWO of those 64gb memory sticks ( the 3200Mhz ) installed stock.
My problem is that there's no configuration supposed to work with just 2 modules. For all I know you got lucky with those 2 specific modules due to the latency of 22, and now are hitting the reality due to the latency of 21 of those modules you purchased.
Did you buy enough modules to actually fulfill one of the cases detailed in the table ?