Search

Good Day i have a Dell PowerEdge R440 one of the drives it came with failed Dell does not sell the same drives anymore due to the age of the R440 I have been told that i need to find a drive with similar/Exact specs as the one that went down to rebuild the RAID 1 that came pre-installed before i i

Hi, After putting the wrong config regarding SSL certificate now the apache subsystem will not start. In the logs it says:"There was a problem veryfing the Apache config: AH00526: Syntax error on line 1 of /usr/local/etc/apache24/Inclues/ssl-hostnames.conf"I am connected to my SC through USB<-&g

Looking for a web based or Windows software of open manage to reconfigure raid rather than reboot or command line perc commands

I have 3 Dell FX2 chassis. One of them in the CMC management web page was running terribly slow.  I want to idrac to one of the server blades to watch a reboot for a vmware update.  I also wanted to update the bios.  The web gui was so unbearably slow that I canceled out and tried al

Resizable Bar Disabled Intel 770, Says Unsupported Device. All conditions are satisfied. GPU-Z simply says Unsupported Device. How do I Enable it?

Good morning, nice Dell community! The context: I have a dell boss s-1 card which is to be installed into a dell r640 server. The problem: the card has a full profile bracket. The question: do you know if it is possible to order the low profile bracket for the boss s-1? best regards, Dmitry

Hi, I'm using an old Dell PoweEdge R515 with iDrac 6. A DIMM had issues, so the IPMI started logging "Persistent correctable memory error rate has increased for a memory device at location DIMM_B3" errors, arriving to "Persistent correctable memory error logging disabled for a memory device at locat

S/N: CN-0RVC21-74261-38V-2HFU

Hi Team, I;m currently using below raid controller card. Slimline SL1 Broadcom / LSI PERC H965i Front 24 GT/s RAID 8.8.0.0.18-26 Question Is below firmware compatible with this card ?  Dell Support – Firmware Version 8.11.2.0.18-26 Thank you&nbs

Looking for info on this utility after not being able to apply firmware updates via the most recent SUU or by downloading the specific update for RHEL 8 for our R340s. Support said I could download the windows version of the update and apply via LifeCycle but that does not work and per this article

The integrated graphics card is starting to have issues. The display is showing a blue color and it wont accept video resolutions that used to work fine in the past.  When I bought the T440 many years ago I installed a PCI graphics card in it, but the system doesn't see it.  Unfortunately

Other than the backplane (N9YVX) do I need completely different nodes or can I just get a server card (VNFMF) and a cable (X50KP) for each node? Thanks!

I am looking for in-depth commands for troubleshooting Port-Cannel.   The issue is that I have been tasked with making a L2 LAG to switches that are physically separated by 3,000 miles.  I fully understand this is unheard of but this is my task. To add to the fun the two links are with d

Request for Unlocking Quotes for BIH During the preparation of our tender dossier, we have encountered a situation where information has been leaked. To ensure transparency and fairness in the bidding process, BIH requests that Dell unlock all Purchase Orders (POs) listed under the name EU as BIH.

Was previously under version 4.4.0 of OpenManage Enterprise with the service plugin working. Went and upgraded to 4.5.0 which necessitated the disabling of all plugins. Upgrade completed successfully, but now after re-enabling the Service plugin, the "Enable Services Connectivity" is unchecked and g

Hello, I've been recently following the Intel instability issue for some time now. I noticed last week some brands were releasing BIOS updates for their boards with the microcode update 0x129 that was supposed to fix the voltage bug in the chips. I noticed Dell also released a new Aurora R16 BIOS up

I'm trying to figure out which card I need for an ML3. As far as I can tell one of these should work: QLE246x FC QLE26xx FC  BR8x5 FC  It would go in an R740 or R750. Anyone have any ideas?

I have a PowerEdge e1000m chassis with multiple PowerEdge M620 servers. One server (server-1) is inaccessible through the iDRAC web interface because its NIC is set to Share mode, blocking remote access to its management IP. No operating system is installed on that server yet. I’m using CMC version

I am looking to run a M1000e out of my residence for a home based business. It has three Force10 panels, six E2700P-00 power supplies, and sixteen identical half height m620 blades with dual E5-2630L and 64gb of DDR3L.  I have two 120v -240v Chatsworth enterprise PDUs.I am trying to figure out

Hello, As the subject states, I am trying to connect a PowerVault MD1400 to OpenManage Enterprise 3.10. The server to which it is attached has been discovered and displays all information from the server side without issue. The issue is when looking at the Update Firmware page in OME, all of the dr