Search

Posts
Selected Posts

Search Results (2.3K)

Conversation Type :

Posts

Selected Posts

Published Date :

Lifetime

Selected Lifetime

Category

Activity
Selected Activity
N

Community Accepted Solution

Boot Failed: Raid Controller

Hello! I'm a complete noob to this so please excuse my lack of knowledge. I'm looking for some help with this. I bought a used R730, and am currently configuring it. The hard disks I have are 4 new 1.2 TB SAS Hard Drives (Dell WXPCX). I'm trying to set up RAID 6 on it, and then will be installing

Question

1.4K

6

0

Community Accepted Solution

PowerEdge PowerEdge R740 disk replacement

Hello, I would like to replace a failed disk in my RAID disk pool with the following model: SEAGATE 900 GB EXOS 15E900 2.5" 15K SAS 12 Gbps 256 MB Cache (ST900MP0006). The current disk configuration in my server is as follows: Model: SEAGATE ST600MP0036 Revision: KT39 Serial Number: WAF2APS9 Di

Question

19

3

0

Community Accepted Solution

PowerEdge R520, Perc710 and 4TB sas disk

hi, i got two R520 running ubuntu on them and got hold of some 4TB sas disk, and the server will only see them as 2TB Have been looking for som new drivers for the perc 710 without success. is this a dead end trying to run 4TB disk on the server or is the a way to fix it? have installe latest bios

Question

11

1

0

Community Accepted Solution

Add Hot Spare to existing RAID-10

I have a Dell R630 (10-bay) and set it up with RAID-10 using 4 drives and 1 hot spare. I've added 5 more drives and would like to set them as hot spares, but haven't found a way to do this.  I have idrac8 and tried using this, but it only allows global-hot spare.  When I set one of the dr

Question

16

1

0

Community Accepted Solution

Dell T610 Perc H700 RAID foreign configuration with missing disk

Hi all, My old T610 crushed and after reboot I saw this message: Foreign configuration(s) found on adapter.Press any key to continue or ‘C’ load the configuration utility,or press ‘F’ to import foreign configuration(s) and continue. After launching configuration utility I saw this: One disk in fore

Question

19

7

0

Community Accepted Solution

T320 SAS Compatibility

Hi... I have 6 drive (used but working) ST6000NM0034 (512e). The orginal controller is a H310 full size but it doesn't recognize the correct size of the drive and blocked them... no proxmox or other OS can see the drive. I bought a LSI SAS9207-8i and with that the drive are recognized correctly in B

Question

18

4

0

Community Accepted Solution

Choosing between R260 vs. R360 with 3.5" RAID1 (PERC H355)

Hi,Can't make my mind up between choosing R260 or R360 for a simple 2x3.5" RAID1 using the PERC H355.In case one drive fails:- I understand that the R260 is not available with hot-plug functionality for 3.5", so I would have to power down the system, unscrew the failed drive and power up the system

Question

43

2

0

Official Solution

PowerEdge R230 maximum storage capacity and part numbers list

Plan to upgrade the R230 storage capaicity, existing 4TB x 2 3.5" does it support 8TB or 12TB ? 161-BBFL 8TB Hard Drive SATA 6Gbps 7.2K 512n 3.5in Cabled, CUS Kit SATA Hard Disk got the part numbers?

Question

66

4

0

Official Solution

One or more boot drivers require configuration changes. Press any key to load the driver health manager for configuration

Hello, I have 3 DELL R740 server. Each one has 5 data disks, each disk is configured as a Raid0. Each sever has 1 catch disk, configured as Raid0 also. Now server 1 and 2 has one data disk fault respectively, and server 3 has the catch disk fault. All srevers give the warning 'One or more boot driv

Question

47

1

0

Official Solution

Dell R710 w/ PERC H700 & Seagate ST900MM0006 Drives

Hi All, Looking for advice here, I am setting up this server for home use and currently have Dell ST9900805SS and want to expand the array with used Datacenter Seagate ST900MM0006 drives, which I got from a DC refresh recently. The drives that came with the server (ST9900805SS) are on their last l

Question

16

1

0

Official Solution

Booting ProxMox from PCIe plugged-in NMVe SSD

I was to install ProxMox hypervisor on 1TB SSD using NMVe adapter plugged into PCIe slot #1. The installation process can see it but Boot Manager cannot. Am I doing something wrong or Boot Manager can see only what's plugged into 8x2.5" slots at front of chassis? My plan was to install hypervisor on

Question

141

9

0

Community Accepted Solution

PowerEdge R515 can't see SAS disks after switch H700 to H200

Hello, I am working on a Dell PowerEdge R515 where the provided PERC H700 has been switched with an H200. When the H700 is installed, the utility correctly sees the enclosure disks (2x SAS) and the frontal disks (2x SATA and 10xSAS). There are no virtual disks nor foreign configurations. When swit

Question

30

11

0

Official Solution

Need to replace Dell Server drive with Dell approved dirve

What is the Dell website for purchasing this replacement drive ? I need spares in preparation for drive failure. <Private data removed from public view. DELL-Admin> Hard drive model is HDEPV41DBB51 - 8TB Sata 7200

Question

21

1

0

Community Accepted Solution

Poweredge T160 SATA& Power Cable

hello , I have a DELL PE T160 server with 3 factory installed caddies for 3.5" sata drives. Now i want to upgrade it with 2 SSDs 2.5" and 3x3.5" HDDs. What is the part# of the cable needed to be installed in SL2_PCH_PA2? or the cable installed in SL1_PCH_SA1 must be replaced with another cable suppo

Question

51

2

0

Community Accepted Solution

Add a Perc card to a PowerEdge R440

I am looking to add a Perc H330 to a PowerEdge R440 (4 x 3.5" hot plug). What little I have been able to find is that I will likely need a Perc riser and mini-SAS cables, but am having trouble finding details (most posts refer to the Perc H730).  Do I need a riser, which one, and any clue on t

Question

605

4

0

Community Accepted Solution

Official Solution

PERC S150 Raid-1 Confusion

Hello, I am having an issue with our primary server's RAID configuration. This is a Windows 2022 Server that I setup a few years back, and I thought I set it up as a RAID-1 mirror with 2 physical hard drives. I had not checked the RAID logs in the last 2 years due to some health issues; but I am cur

Question

42

9

0

Official Solution

R740 restarting process stops at Customize System window

After power cycle, the server starts to reboot. But the restarting process stops at the below place, there is no skip or other way to make the restarting process continue

Question

24

17

0

Community Accepted Solution

Dell PowerEdge T40 cannot find Internal HDD

Hi I have a new Server Dell PowerEdge T40 My problem is the my Internal HDD won't show in BIOS and won't start in Boot Sequence.  Advanced Boot OptionDriversSecure Boot DisableBoot Sequences   I have Updates the latest BIOS drivers 1.1.1... Please help me to fix that

Question

18.5K

40

0

Official Solution

PowerEdge R660xs - No drives Detected

"I had a problem when installing Windows Server. I already set up the virtual disk and followed some instructions in the video, but the issue remains the same."

Question

28

1

0

Official Solution

Dell Storage MD1400 controller showing oflline

Dear Sir, Can you please guide me for the below issue/picuture showing in the dell storage and storage is showing offline, so can you guide me reslove this issue - urgently. thanks

Question

13

1

0

Dell Support Results

No Results found!

Top