Search

I am setting up a newly acquired MX7000 that was brought over via acquisition. The root password was unknown, so we have gained access through the password reset jumper. However, there are no password fields for resetting the root account, nor can I create a new user account due to no password fiel

We have an MX7000 where the MM2 (standby) stopped working. We purchased a new MM to replace it, but the new module remains in the "Initializing" status and does not move past this message in the GUI and the front panel. There are also two errors related to MM2 concerning firmware mismatch and lost r

Hello everyone, I'm experiencing an issue with detecting disks from the MX5016s storage module on a Dell EMC MX7000 chassis configured with: An MX5000s I/O module. Two MX750c blade servers with PERC H755MX controllers. Problem Description: Internal disks on the blades are detected correctly us

The PERC Controller H730P's battery needs replacement and I have looked online about how to order, replace it on a M-640 Blade, but cannot seem to find a video, and/or documentation showing this. I have found a video for an M-630, but cannot confirm if this would work. Could anyone please share th

Hi, I have a M1000e Chassis with six I/O modules.My questions are: - Can the Fabric A include Dell PowerConnect 8024-K? Somewhere in Dell documentation was stated, "This switch may be installed in either Fabric B or Fabric C."- The switch-1 (8024-k) shows the following interfaces:Te1/0/1   

We've got a new pair of MX7000s in a new DC, and I'm trying to get their FC working to the Unity 480 we have in the same room. The Unitys are connected to a pair of Cisco 9132Ts (not stacked), two cables on each controller connected to each Cisco. Meanwhile, each MX7000 has two connections from it

Hi all, Does someone know what is the P/N to locate this piece? SATA Repeater (MOD N014K)The M610 internal SATA Repeater HBA is an expansion card that plugs into the dedicated storagecontroller slot. The card is connected to the ICH9 SATA port through the controller slot to supportone SATA 2.5‖ ha

Hi all, I need caddies for M610 and M620 blades. I see some portals where this ref NRX7Y is ok for all two models but others where PN differs for M610 with ref 8FKXC / NTPP3 / G176J. Could someone confirm what is the correct PN of caddy for each blade model? Thanks in advance,

Hi all, We are trying to find a list of SAS SSD compatible drives but I don't find nothing. What we want are 1.2TB and 2.4TB or similar SAS SSD drives to improve performance as actually we are using SAS HDD drives. Thank you in advance,

I have DELL M1000e (2vsys) and 2 switch cisco N5K, use port-channel( dell te0/49-50 <-> cisco e1/37-40) with vsys-1 & N5K-1, it working normal but with vsys-2 & N5K-2, port status up but protocol down when I show port channel on DELL, it have only member te 0/49 https://drive.google.c

Does the M640 blade has a solution to increase video performance? I am seeing this 3rd party card DXG-S7100X for PowerEdge M640 and M630 but I want to see if someone has used it and it works with Autocad. Regards,

Hi, We have a M640 blade wich is reporting CMOS battery fault. We have changed it but the alarm is still present. I saw a procedure to clear CMOS battery on iDRAC8 but I am unable to find that option on iDRAC9. Is that option removed? Should be cleared automatically or I have to reset iDRAC maybe?

Hello, I have some FC630s that I'd like to use the 2x2.5" drive bays on the front. The BIOS shows an onboard SATA/RAID controller, however it seems like there is some kind of cable or other module that I need to install under the drive cage to make it so the disks show up. I can't seem to find any

Hi all, We have installed two new blades M640 on a VRTX chassis that have another 2 existing blades. I check we have the two SPERCs correctly detected but the new blades are not able to see shared storage. Checking inventory on each blade I find that existing blades have these entries "Chassis I

I have a Dell 1000E blade with a 220v power supply, I want to exchange the 220v sources for 220v/110v sources, both have the same specification, what changes is the input voltage which will change to 220v/127v. Is it possible and compatible?

Hi, We have a VRTX chassis with 2 blades we want to expand but I found that is not ready for more blades. Is there a possibility of expanding it or does the entire chassis have to be replaced?. Thanks in advance,

Hello, I was wondering if someone could help me with figuring how to get the CMC module to work. I have one CMC module that when the enclosure is turned on throws an error saying “ The CMC is not responding.” I have tried moving it back and forth from both CMC slots but I still have that error. I am

For our C6420 Blades with NVMes (U.2), when we run them with 1 CPU, they do not display the NVMes, but when we add a CPU (to make it 2 CPUs), they display just fine. I see nothing in the docs about these blades requiring 2 CPUs installed in order to display the NVMes, so I am wondering what may be

Good afternoon, This might be a dumb question but is there a specific Boss card that I need to use for MX750c server blades? mpn? (BOSS card with 2 M.2 240GB SATA drives) Thank you all!

Hello.....I have a VRTX and got a non-critical alert under the Chassis Health section on the Chassis Management Controller Interface. The alert I got was "perc-1 Chassis Integrated 1 RAID Controller has left the fault tolerant pair". Everything is fine and all the green checkboxes are fine next to t