Search Results (411)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
I bought what was described as a HBA355i, but it turns out to be a MegaRAID card (H335i) instead of the IT mode HBA355i. It was Dell P/N 0VCV6T. So, I want to avoid the same mistake going forward, can someone please provide the Dell P/Ns for:HBA350iHBA355iHBA355eThank you!
Question
•
PowerEdge OS Forum
Official Solution
Hello, we have a Dell PowerEdge R640 server with a PERC H750 RAID controller. Could you please advise which Dell SATA/SAS SSD drives would be compatible with our server and RAID controller?
Question
•
PowerEdge OS Forum
Official Solution
Hi Dell, I have a PowerEdge R650xs serverrunning esxi version DEL-ESXi-700_15843807-A00 (Dell Inc.) Current Raid Card: PERC H755 Front I am running 2 single disks on the server and have 6 extra slots to add more drives, can I buy 6 more drives to attach to the server and configure the raid for that
Question
•
PowerEdge OS Forum
Official Solution
Hello, Could you please let me know of iDrac is affected by vulnerability: CVE-2024-39894? Description: OpenSSH 9.5 through 9.7 before 9.8 sometimes allows timing attacks against echo-off password entry (e.g., for su and Sudo) because of an ObscureKeystrokeTiming logic error. Similarly, other tim
Question
•
PowerEdge OS Forum
Community Accepted Solution
Hello, I replace on a Dell R740 with H740P mini a broken disk, already assigned as global spare but still not rebuilding neither being assigned to an existent VD. Can you please let me know what i'm doing wrong in here? Many thanks for your support.
Question
•
PowerEdge OS Forum
Official Solution
Im trying to find the selection for enabling alerts within the configuration template. In iDRAC9 its under Configuration/ System Settings/Alerts/Alert Enable. Where can i find that in the template?
Question
•
PowerEdge OS Forum
Official Solution
Hello!There are two network modules on the FX2s chassis. Dell PowerEdge FN 410T IOM A1Dell PowerEdge FN 410T IOM A2 The module is running in "full switch" mode I have the following problem:In module A1, the Te 0/8 internal port is running at 1G speed, but I need it to run at 10G speed. In modu
Question
•
PowerEdge OS Forum
Community Accepted Solution
Official Solution
CVE-2024-38475 Improper escaping of output in mod_rewrite in Apache HTTP Server 2.4.59 and earlier allows an attacker to map URLs to filesystem locations that are permitted to be served by the server but are not intentionally/directly reachable by any URL, resulting in code execution or source code
Question
•
PowerEdge OS Forum
Community Accepted Solution
I recently migrated Dell Open Manage Enterprise from 3.10.x to 4.1.x. This was a complete appliance/VM migration. When we try to run any new or built-in report we get the following error. "No Data Found".
Question
•
PowerEdge OS Forum
Official Solution
We recently bought PowerEdge Server. It has RAID/Internal Storage Controllers (PERC H755N Front). We have 3.2Tb NVME harddisk but they are recognised as SSD in the Ubuntu 22.04 operating system we installed.Any suggestions please.
Question
•
PowerEdge OS Forum
Community Accepted Solution
I recently acquired an R730 with an H730P Mini RAID controller, and I suspect there might be an issue with it that I can't pinpoint. A few days ago, I added some disks to this server and performed a CLEAR operation on them. The disks in question are: 4x HDD TOSHIBA AL14SEB120N4x SSD KINGSTON SEDC60
Question
•
PowerEdge OS Forum
Community Accepted Solution
Problem: I am trying to install windows 10 on a PowerEdge R730 (broken computer). During windows installation through USB, I am unable to find any drives to install windows on. When I try to find a load driver, I find nothing as well. I have another PowerEdge R730 (working computer) system that has
Question
•
PowerEdge OS Forum
Community Accepted Solution
Hello, Can the Poweredge R320 Intel Xeon E5 2470v2 2470 V2 2.4GHz 10-Core LGA 1356 cpu processor? And if It can work do I have to do anything to get it to work if I want to use the cpu if it will work? I am 100% new to servers which is why I am asking. Thanks Grendor
Question
•
PowerEdge OS Forum
Official Solution
Not sure if this is possibly or not. I have three lan cables running to the server from the modem and switch and Im hoping I dont have to run another cable. Dell Poweredge r710. Ubuntu server is on the other side of the downstairs family room. Everything enters and leaves from my fiber modem and s
Question
•
PowerEdge OS Forum
Official Solution
I have R540 with Perc h750 & two SATA SSD on RAID 1. I deploy W Server 2019 STD with the wizard on LifeCycle Controller (pressing F10 on boot) First i update the firmware & drivers. This procesess result ok. When finish the instalation of Windows Server 2019, i found in "devices manager" a l
Question
•
PowerEdge OS Forum
Official Solution
My company recently purchased a Dell R410 server, and I encountered an issue where my SATA drives are not recognized by the BIOS. I entered the BIOS setup, set the SATA mode to AHCI, and disabled RAID because I don't intend to use it. The hard drives can blink, indicating power and activity. I verif
Question
•
PowerEdge OS Forum
Community Accepted Solution
Hello, I have a customer who's R630 is not successfully booting. We were getting Error UEFI0116. With Error UEFI0116 we were not able to boot to System Setup through F2. It was giving us only access to the Integrated RAID Controller Configuration Utility which showed; Virtual Disk 0: VDisk1, RAID
Question
•
PowerEdge OS Forum
Community Accepted Solution
Hi, I have issue, I upgraded my ram and hard drive about 3 weeks ago. The server worked normally until yesterday. The situation is that it cannot boot into the operating system and stops at this screen. Can you guide me to fix it? Thanks!
Question
•
PowerEdge OS Forum
Community Accepted Solution
Dear Guys, I have multiple servers at my data center like R740 and R350, while checking for updates, some servers shows to update the iDRAC from v6.xx to v7.xx and the strange thing that some other servers NOT showing this update. So, I downloaded iDRAC v7 manually then apply it to the servers. Aft
Question
•
PowerEdge OS Forum
Community Accepted Solution
We recently downloaded and attempting to install the latest version of DCIS 6.5 which was released 3 days ago on MECM/SCCM version 2309. Upon reading the supported SCCM/MECM versions for DCIS it is only supported to SCCM version 2303. Do any Dell Developers know when DCIS will be supported in MECM v
Question
•
PowerEdge OS Forum