Search

Hello, I have an R430 with an H710 adapter. I use Windows in UEFI boot and all works fine. I intended to add an MD1200 via an H810 PCI card but when I insert the card I get an UEFI0116 error and a boot loop. Googling suggests that I needed to remove the card, boot in BIOS mode and this works (the

EOL date for PV ME4024?

Hello, I am planning to expand the storage capacity of a Dell PowerVault ME5 series array by purchasing additional disks. Currently, the array utilizes 8 disk slots with Dell-branded drives (PN: MZILG1T9HCJRAD3). My question is: if I add additional drives with the same part number (PN), but not Dell

Hello, it is possible to fix this issue? Info from console: -=<###>=- Instantiating /ram as rawFs, device = 0x1 Formatting /ram for DOSFS Instantiating /ram as rawFs, device = 0x1 Formatting...Retrieved old volume params with %38 confidence: Volume Parameters: FAT type: FAT32, sectors per cl

I am unable to find any documentation from Dell regarding CVE-2024-6387 and the PowerVault product line. Looking to find out how this vulnerability was addressed as there has been no updates to firmware since 03 JAN 2024.

Hello everyone, I have Sorage Dell ME4024 and had a disk was replaced successfully, and i need to clear event logs, How can i clean these events? Thanks FS

Hello, I need to know if a PowerVault 114x works with LTO 7/8/9. We currently have an LTO 6 and would need to upgrade it. Could you please send me which products will work with this unit? Please include their part numbers and the firmware I should install.

I am using a Dell MD3400 server connected to three Dell servers for camera storage, with RAID 5 configuration. Currently, the disk in slot 0 has failed. What precautions should I take when replacing the disk in slot 0? Do I need to stop the recording software before replacing the disk?"

I had two disks that apparently stopped being part of a disk group. When I tried to add them back, it fails. I've tried replacing with brand new drives and still does not work. The drives show health as OK and both available. What's causing them not to be added to their disk group? This enclos

Hi Everyone, We manage a bunch of ME4 and ME5 Arrays. One of them has some read latency that we are looking into. I would appreciate anyone's experience. It is a ME4 Running the latest firmware 280-14. All of the hard disks have had the firmware updated. (23 x 2.4TB 10k SAS SED) and 1 1.92 TB SED

Good Day, We have an out of warranty MD1400 that stopped working after an environment power failure. It has no blue light on front and both EMM cards show solid amber. In the connected H830 it shows the chassis but with no slots or drives. Connecting to maintenance via serial it gives a Locked Dow

hi Folks, I need to confirm whether the following SAS HBA is the right one to purchase to install into a PowerEdge r7515 so that it can connect to a Powervault ME5012 storage array, which has 4 SAS ports. For connection redundancy, I believe two SAS ports is recommended to be connected to the SAS

Hi Folks, if anyone has some working knowledge with enabling Shadow Copies on an NTFS drive on behalf of a large REFS volume in Windows Server, kindly offer your feedback---good or bad. I recently purchased a 12-disk Dell PowerVault ME5012 which will hook up to a Dell PE 7515 via a 12GB SAS connec

Hi, is it possible to do IP replication within different networks (via L3) for ME5012 arrays? The thing is that I have two arrays in different places, different networks, VLANs, etc. and I want to set up replication. Is it possible?

Hello community Can I upgrade me5024 to the latest version directly or there are hops, if there please explain them to me, and which minimum version can I upgrade from to the latest version directly?

I accidentally powered on the enclosure after connecting the power cables. I did not connect the enclosure to the management network and also did not establish SAS cabling to the host server. Would this affect the initial configuration of the storage system? If yes, how do I power off the enclosure

I have a PowerVault ME5024 with 4 drivers SAS and 4 drivers SSD SAS, so I wonder what I should do about choosing 1 pool or 2 pool, and what disk group means.

Hello! Thank you for taking some time to read over this post! I currently have a Dell MD1400 that I need to connect to the USB serial interface. However, when I do connect, I am presented with an unknown driver for the USB serial interface (Dual RS232 is what it comes up with in Device Manager).

Hi All, as per the subject, I have to replace one of the two RAID controllers on a MD3600F FW version 07.84.53.60 with another spare that I have had in stock for a few years and of which I do not know the installed firmware version. I know that in the case of installing a ctrl with an older version,

Hello, I have the following challenge codes and need response codes to reset the passwords. Port 1 MZKPG70ATTHPort 2 MZFTKHXC4JZ Thank you in advance.