Search

impossible to connect to the anywhere pot of the vmax 200 k on the primary MMCS1 anywhere, yet we connect to the secondary MMCS2however the ping passes and its port 9519 is open.

Hello everyone. Please I need help I have a vmax 250F and I administer it through unisphere for powermax. I have this alert Back-End metadata usage has changed to 100 percent and I cannot locate the impact on my bay and know how to proceed to correct the alert.

can any one help to get the part number of the disks below:- Vendor ID : SEAGATEProduct ID : STTBSND1CLAR1200Product Revision : THBA120Serial ID : S4019DQP Disk Blocks : 2306949120Total Disk Capacity (MB) : 1144041Block Size : 520Free Disk Capacity (MB) : 0Rated Disk Capacity (GB) : 1200Hyper S

I am trying to split a SRDF\A group and after successfully executing the split command, the status shows as 'failed over'. Any idea why it is behaving like this?? The status suppose to see as 'Split' why this strange behavior? Device Dev   E  Tracks   Tracks  S Dev&nb

Can anyone please give the exact steps for unmapping and deleting RDF volumes? i mean what steps I need to perform in the source and destination side in SRDF perspective   Thanks in advance..

Hello Team, Can someone provide me the steps to expand a lun which is being replicated via SRDF. I have suspended SRDF and then tried to expand the lun, but still getting error stating the lun is in rdf group.

Hello Team, I need some help. I have Storage DELL VMAX F250 + Server DELL PowerEdge R740 with 2 HBA QLogic 2x25GE QL41262HMCU and Windows Server 2019 Standard + Brocade type 166 FC/FCoE switch (Brocade X6-8). i need access to do the DELL compatibility matrix being the FCoE protocol. In that case

Hi, what could be the possible reasons for EDS directors remain 100% busy in VMAX450F ? Thanks

Hi, as I understand it, you need to present GateKeepers over fibre channel to a Solutions Enabler management server, to manage the arrays. Is it possible to manage an array without FC connectivity, using only IP? Thanks

lock 15 is held by internal change session cannot be released   I need help with this, how to release this lock.  When I try symcfg -sid xxxx -lockn 15 release -force  I get this message   Lock 15 is held by an internal change session cannot be released

HI,  I need help, I  tried to replace disks on VMAX (Symetrics 10K ), but I'm getting this error: Different performance type and the scripts fails, and ask to insert the original disk.   What can i do to check  the disks.  

How to replace Service Processor for VMAX 40K? I cannot find SP Replacement procedure on Online Solve and Support portal. If anyone have this procedure, please give me it. (and any other symmetrix series too.)

I'm using the internal vApp Manager for eManagement (9.1.0.695) on my VMAX3. How do I change the DNS settings? I can see the DNS settings in the network Info dashboard, but I can't find where to change them. I assume the DNS settings are changed in the vApp manager as I don't see a place to change t

Hi, I'm doing some initial scoping for a project where we want to automate a migration using Open Replicator. I can't see anywhere in the REST API any references to OPS. Is this supported? has anyone done anything similar?  

hi, between two sites we have 2 SAN with srdf. can be vol1 in rw more and vol2 in ro mode?vol1 is the srdf part in first site and vol2 in the other site. can be vol1 and vol2 in rw mode?

Hello, Can someone provide insight as to where to download the SRDF vWitness OVA from? I've read the other thread on this forum that calls out an SE OVA that is an older version of SE and all the docs simply state to download it from online support but there is nothing that comes up in any searc

Hi, When i create a LUN as thin provisioning and if this will never fill to the maximum capacity then the unused size is used to create other LUN?I mean inside SAN. tnx

Hi i am migrating from VMAX250F to VMAX 450FX by using SRDF but i have a question, it is just to make sure that everything will work properly 1.-I created my SRDF pairs symrdf -sid 1234 -f filepairs.txt -rdfg 10 -type rdf1 -invalidate r2 2.- I established the pairs symrdf -sid 1234 -

Hi Does any one know if   i need to install a license for Time Finder SnapVx on VMAX All Flash 450FX with solutions enabler 8.4??? i found this info, but i need to make sure if  i need or i dont need it (License) Best regards

I have the following setup: Both VMAX arrays are 250F models. R1 (5TB) ------//------->   R2 (5TB)----(no copy linked snapshot)--->snapvx tgt devices (1TB of changed tracks)         (split) If I perform a deletepair and full establish on this RDF