UNSOLVED

Casy

updated

21 years ago

C

Casy

8 Posts

0

3148

June 8th, 2005 15:00

Adding a IDE Controller Card to Dimension 8400

Will a PROMISE ULTRA133TX2 PCI IDE Controller Card - which Supports 66MHz PCI bus motherboards work in my Dimension 8400 to allow me to add a 40 Gig Western Ditigal Hard drive from my old computer.
 
My system currently has a DVD burner slaved to a DVD connected to the only IDE slot and 1 80 Gig Hard Dirve.
  • shesagordie

    12 Elder

    •

    46017 Posts

    471

    0

    Posted June 8th, 2005 15:00

    Casy.
     
    Yes, it should work.
     
    Bev.
  • Casy

    8 Posts

    471

    0

    Posted June 8th, 2005 17:00

    Thank you.
  • shesagordie

    12 Elder

    •

    46017 Posts

    471

    0

    Posted June 8th, 2005 18:00

    Casy.
     
    You're welcome.
     
    Bev.
  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    471

    0

    Posted June 9th, 2005 02:00

    Casy,

    Assuming you have available PCI slot in your 8400. If you only have sound card and internal modem, the empty PCI slot should be right next to the video card. But if video card is double-wide (like the 6800 GTO) you can't use that PCI slot. In that case you could use a SATA->ATA converter instead of the Promise card.

    If only open PCI slot is next to video card, suggest you rearrange things so smallest, lowest heat card (modem?) is next to video card. Wide ribbon cable on add-in ATA card in my 8400 blocked airflow around video card and tended to hit video card fan so I moved things around to put them as far away as possible.

    Ron
  • Casy

    8 Posts

    471

    0

    Posted June 9th, 2005 20:00

    Rohe

    I don't believe that I have a double wide vedio card, but I will keep your suggestions in mind when I install the Promise card.

    Thanks for your help.