Unsolved
This post is more than 5 years old
2 Posts
0
11228
September 23rd, 2008 12:00
E6400 Sysprep Issue
Has anyone figured out how to get sysprep working on the e6400 with the SATA operation set to IRRT. This is the factory default setting and I would prefer to get this working without changing any settings in the BIOS.
No Events found!
iskondi
2 Posts
0
September 29th, 2008 17:00
I'm running into the same issue, I can get the E6400 working just fine via sysprep if I go back to ATA mode but can't get it working with IRRT.
I'm figuring it's related that my I/O performance is extremely bad.
Any ideas?
Thanks,
Iskondi
fergo99
2 Posts
0
September 29th, 2008 20:00
iskondi
2 Posts
0
September 30th, 2008 19:00
Woot! Thanks Fergo99, that totally solved it for me. Unfortunately it didn't solve the overall feeling like the IO is slower on the E6400 as compared to the D630 but perhaps it is just in my head.
Iskondi