Unsolved
This post is more than 5 years old
2 Intern
•
470 Posts
0
1151
September 21st, 2014 10:00
dont know or cannot find what these initiators aree
Hi I am only supposed to have 8 paths showing but I am seeing a bunch of other intiators showing
on the fabroc switch, only the host wwn and clarion SPs are zoned in.
I cannot find what these initiators are
any idea?
No Events found!
M_Salem
213 Posts
0
September 21st, 2014 10:00
From what i see here, You manually registered your UCS initiators which have WWN starting with 20:00:00:25:B5:xx:xx:xx. Others are not from Cisco UCS, Check their registration status, if they are registered then delete them using de-register button and if they are not zoned to the array then they should not appear again. if they are appearing as not registered then check zoning.
HTH
Mohammed Salem
dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
0
September 21st, 2014 10:00
maybe at time point both HBAs were replaced or the system was migrated to a different physical hardware. If these imitators are listed as registered but not logged-in, then after verifying your zoning i would purge them.
Dhakshinamoorthy
2 Intern
•
174 Posts
0
September 21st, 2014 11:00
Hello,
do you know how long those initiators were in "not-logged in" mode? Check the alerts pane and it will show the date if this happened recently.
also, check with OS team, whether they did any decommission/migration recently?