I once had a dead 720 mobo which I removed. I recall installed an optiplex 755 oem board in 720 case. it fits b/c both are BTX. but it would not turn on any LED. later I got a used 720 board that has bent cpu socket pin but still post. All LEDs work now controlled by 720 BIOS. Apparently if it is not a 720 board, none of the LEDs would power on. this is in contrast to later 730 or 630 models.
I am wondering if there is known LED pinout of front up and lower that one can program in case the 720 board dies and I can use a generic BTX board to power on LED.
* Download and install Nvidia ntune * When finished installing, restart the PC * Press F2 to enter the bios * Scroll down to Performance- Overclocking * Enable overclocking. This will set ntune so you can control the lights * Exit Saving changes and reboot into Windows * Open nTune * Scroll down to Performance- LED Control- nTune * Turn on Advanced View and accept the agreement under performance. This will then give you an option to be able to program your LEDs =========
QuickSet Application for the XPS 720
* After installing QuickSet, reboot your computer and press F2 at the boot screen * Make sure you go to the PERFORMANCE tab and turn ON the Advanced- Performance Application Support for the processor * Now, after starting Windows, open Quickset. You can change your LED effects here * To get Quickset to work with Windows Media Player 11, do the following: - In Quickset under the LED EFFECTS tab, make sure the Windows Media Player add-in is checked - Now open Windows Media Player - Click on the small arrow under the menu NOW PLAYING - Select VISUALIZATIONS - Select DELL XPS Light FX - Select the Light FX effect you wish.
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
front top n bottom led (4 each) uses a 5 pin connector user has mapped out 4/5 are red/green/blue GND and +5V. 1/5 not connected. This overall scheme is similar to 730 MCB front LED.
Dell XPS 700 710 720 Power Button Board with Cable WM325
XPS 720 Front Panel Assembly (including the following parts) a. Front Panel PWA Assembly (Dell P/N Black - XU567) b. Front Panel Ribbon Cable (Dell P/N TM476) 28 pin
The Dell XPS 710 was an incremental upgrade to the XPS 700, with the primary difference being the introduction of the Intel Core 2 Extreme QX6700 quad-core processor in the 710, while the 700 used dual-core processors like the Pentium Extreme Edition
The Dell XPS 720 was a significant upgrade over the XPS 700, offering a more modern NVIDIA nForce 680i SLI chipset (vs. the 700's nForce 590)
redxps630
11 Legend
•
16422 Posts
•
83149 Points
0
0
Posted September 7th, 2025 01:09
Dell Chris M mentioned: how to control RGB LEDs on XPS 720
https://www.dell.com/community/en/conversations/locked-topics-desktops-general/how-do-i-control-the-colored-leds-on-my-xps-720/647e850ef4ccf8a8de585146
There are two ways to do this, using nTune or the QuickSet software.
nTune
https://www.nvidia.com/en-us/drivers/ntune-5053800/
* Download and install Nvidia ntune
* When finished installing, restart the PC
* Press F2 to enter the bios
* Scroll down to Performance- Overclocking
* Enable overclocking. This will set ntune so you can control the lights
* Exit Saving changes and reboot into Windows
* Open nTune
* Scroll down to Performance- LED Control- nTune
* Turn on Advanced View and accept the agreement under performance. This will then give you an option to be able to program your LEDs
=========
QuickSet Application for the XPS 720
* After installing QuickSet, reboot your computer and press F2 at the boot screen
* Make sure you go to the PERFORMANCE tab and turn ON the Advanced- Performance Application Support for the processor
* Now, after starting Windows, open Quickset. You can change your LED effects here
* To get Quickset to work with Windows Media Player 11, do the following:
- In Quickset under the LED EFFECTS tab, make sure the Windows Media Player add-in is checked
- Now open Windows Media Player
- Click on the small arrow under the menu NOW PLAYING
- Select VISUALIZATIONS
- Select DELL XPS Light FX
- Select the Light FX effect you wish.
https://www.dell.com/support/home/en-us/drivers/driversdetails?driverid=037th&oscode=ww1&productcode=xps-720-h2c
(edited)