Couple issues with my Dell XPS 13 2-in-1 (9365 model). All was working fine until recent attempts to setup external docking at home.
First issue - I attempted to use a J5 Create USB-C hub as a docking station for basic power passthrough and external monitor connections. Upon inserting to the thunderbolt port it loaded a driver and appeared to work fine. Later I wanted to switch to the regular USB-C/Dislplay port USB. Plugged in, driver installed, seemed to work, I put laptop to sleep for the night plugged in. Next morning I had boot up errors with the machine, and that port lost all functionality but charging. Going back to thunderbolt port it worked. The USB-C/DP port continues to not work and now doesn't even support charging (regardless of what I plug into it). I've tried all updates/drivers etc I (an admitted novice) novice can think of. Tech support at office no help either. I've returned the J5 as a bad choice but wondering if anyone has a tip to restore the port's functionality? (laptop out of warranty)
Second (more important issue) - purchased a Caldigit USB-C Pro Dock given great reviews and compatibility with both PC/Mac.
Initially it appeared to work flawlessly with my Dell 9365 (only via the working thunderbolt port) and was seamlessly interchangeable with my MacBook Pro (~2016 13"). Today the Dell stopped properly charging with the dock (an 85W capacity). It still showed being plugged in, had fine internet via hardwire to the dock, and external monitor works (also via connection to dock). The battery however drained faster than it charged, which I discovered upon the Dell dying unexpectedly. I swapped my Mac and it charges without issue on the dock (suggesting the dock is fine). To test my Dell, I plugged in the Dell branded charger (30w) and it works fine. Also tried my Mac's 61w charger with the Dell; it worked fine in the past but today, appears to be treated by the Dell similar to the Caldigit doc. Dell recognizes its plugged in but battery drains faster than its charged. All to say, my impression is the Dell is somehow throttling the power from non Dell chargers? This wasn't a problem before, no settings have been changed.
My one solution so far has been to boot in to BIOS with the dock plugged in, tinker with power settings (choosing primarily AC under power management) then exiting the BIOS. On doing that charging correctly via the dock resumed and charged the Dell battery entirely. Later I swapped out the Mac on the dock, it charges fine as it always has, and shows the dock is charging it at 85w under the Mac's system information/power . When I put the Dell back, the non-charging problem returned. Only solution again was the BIOS boot and tinker as described above (a regular restart while plugged into the dock wouldn't work).
My 9365 is specifically mentioned on Caldigit's websites for thunderbolt compatibility settings here -
and should be fully compatible with Caldigit's well rated Windows/Mac universal dock. But clearly the Dell suddenly isn't getting along with it (or anything but the Dell charger). Any tips on either issue, particularly #2, are VERY MUCH appreciated, I need this machine to work well for work and have burned countless hours on this an other issues in this new work from home era.
Hope you're all staying safe. Thanks in advance for your thoughts!
JMSD28
1 Rookie
•
6 Posts
1622
0
Posted April 11th, 2020 10:00
Bump. Anyone have a suggestion?
Thanks