bbcannon
1 Copper

RE: Bios update help

I had the same issue.  I then found the forum post below and my problems were solved.  I updated my BIOS from A07 to A11 via usb.  You will most likely need to go to A05 and then from A05 to A11.  By the way, write down all your BIOS settings before you flash.  Then after the flash you can make sure they are still the same.  My computer did not boot after I flashed.  If I remember right, I think that I had to change SATA mode to AHCI.  Just write down your current BIOS settings and you will be covered.  

http://forums.evga.com/tm.aspx?m=1142390

http://www.sevenforums.com/tutorials/46707-ms-dos-bootable-flash-drive-create.html

0 Kudos