AD1533
1 Nickel

Changing Equallogic PS6100 Mgmt IP address

Hi,

Trying to change management IP Settings.

2 x EQL 6100XV

Current settings on eth4 management ports

Group Mgmt IP: 192.168.180.27 / 255.255.255.0

EQLSAN1 IP: 192.168.180.28

EQLSAN1 IP: 192.168.180.29

 

Change IPs to 192.168.192.197 - 199 / 255.255.252.0

I attempted to use GUI (Group Conf > Advanced > Config Mgmt Ntwk) and I get an error: "There must be at least one member network interface on the same subnet as the management address"

Tried to do it via serial CLI on a member eth4 > ipaddress 192.168.192.198 netmask 255.255.252.0 and I get same error.

Do I need to temporarily down the port before changing, am I doing it the wrong way?

0 Kudos