dwilliam62
3 Silver

Re: Changing Equallogic PS6100 Mgmt IP address

Hello Joe,

I can help you with that.

 The easiest way to change the Mgmt Interface is to disable it, then re-enable it with the new IP schema.

However, since it appears that you only want to get the data off this array,  once you disable it, there's no need to re-enable it at all.  The Mgmt interface is optional, if you want to manage it from off the iSCSI subnet when the SAN subnet isn't routed. 

 Without the Dedicated Mgmt port enabled, the Discovery address (Group IP) becomes the Mgmt IP address as well.

  FYI:   It's better to start a new topic vs. reply to an old one.

 

 Regards,

Don

 

0 Kudos