Compellent -> R710 -> TL2000 Performance Issue
Good morning. We have tested Windows backups of data from the Compellent to a physical drive within the R710, copies of 15 GB worth of
data from the Compellent to the R710, and backups of 15+ GB of data from the R710’s physical drive to the TL2000 (LTO5 HH) drives are
all extremely faster than running backups of the data from the Compellent to the LTO5 HH drives. All firmware has been updated for the
TL2000, LTO5’s, etc. We should be seeing much greater than 3 GB/Min for this backup, currently only seeing 247 MB/Min. The total
amount of data to be backed up for this job is ~690 GB.
The backup software is Ultrabac 9.2.4.
A pair of dual-port x520 NICs using 1 port from each of the x520’s configured redundantly (2 ports unused)
No Jumbo Frames
Cisco Nexus 5K
Ports configured/optimized for iSCSI
we do not see any performance problems running Windows backups from the Compellent to the server. The performance problems only occur
when running data from the Compellent -> 10 GbE NIC -> R710 -> 6 Gbps SAS HBA -> SAS LTO5 tape drive
Any ideas of what could be causing the bottleneck?
Re: Compellent -> R710 -> TL2000 Performance Issue
I asked one of our Compellent contacts and he said at first glance it sounds like a queue depth problem with the application. I suggest you open a case with CoPilot and see if they can help. If there is a problem with them opening a case post back and we can escalate on our side.