1 Copper

single 16GB DDR3 in a dell 7500 or dell 5500 precision

I am wondering if a single stick 16 GB RAM DDR3 would be OK for a Dell precision 7500 or 5500. These machines are without RISER. In page 4 of the service manual it states:

NOTE: If any DIMMs are >30mm tall (possible early 16GB DIMMs), they must be installed on the system board only. guide_en-us.pdf

has anyone tried with a single stick of 16GB memory? For example I found one here [1]

0 Kudos