8 Krypton

PN for the primary heatsink in a T7500?

 

What is the part number for the primary CPU heatsink in a Precision T7500?

 

Ian.

 

 

0 Kudos
8 Krypton

Re: PN for the primary heatsink in a T7500?

 Ian Mapleson

Dell Precision T7500 primary CPU Heatsink & Fan, Dell P/N W567F, or U414F.

Bev.

 


If my answer was helpful, please click: Kudos
Forum Member since 2001
I am not employed by Dell

0 Kudos
8 Krypton

Re: PN for the primary heatsink in a T7500?

Are you sure? I've done some searching, all the references say those are the PNs for the 2nd CPU

option, not the primary.

 

Or do you mean that the primary HS is the same one? Looking inside the case, that doesn't look right

re the extra blower asy.

 

Thanks!!

 

Ian.

 

 

0 Kudos
8 Krypton

Re: PN for the primary heatsink in a T7500?

 

Found it! The correct PN is T021F. And I found a source aswell, so I'm sorted. Thanks!! 😎

 

Ian.

 

 

0 Kudos
8 Krypton

Re: PN for the primary heatsink in a T7500?

Hi,

T021F is the aluminium version - but there is also U016F:

0 Kudos
8 Krypton

Re: PN for the primary heatsink in a T7500?

Part Number(s): U016F/ 0U016F Heatsink Assembly for Primary CPU, Performance
Category: Internal Parts and assemblies
Sub Category: Cooling Fans/ Heatsinks
Notes: HTSNK, CPU, PRI, PRF
Part Number U016F/ 0U016F compatible with the following Dell Models:

Precision T3500, Precision T5500, Precision Workstation T3500, Precision Workstation T5500, T3500 WORKSTATION, T5500 WORKSTATION


Report Unresolved Customer Service Issues
here

I do not work for Dell. I too am a user.

The forum is primarily user to user, with Dell employees moderating
Contact USA Technical Support






Get Support on Twitter @DellCaresPro

0 Kudos
8 Krypton

Re: PN for the primary heatsink in a T7500?

Part Number U016F/ 0U016F compatible with the following Dell Models:

Precision T3500, Precision T5500, Precision Workstation T3500, Precision Workstation T5500, T3500 WORKSTATION, T5500 WORKSTATION

OK ... and ?? What is your point ??

I don't have this heatsink, but if you look at the "Black Plastic Air Baffle XX416":

you will see four holes - I bet they will perfectly fit for the heatpipes from the heatsink 🙂

Otherwise - why they would bother to make those holes ??

The same situation is with memory risers for Dell 690 / T7400 - part numbers are different but memory risers with P/N for 690 are working perfectly fine in T7400 and vice versa. Heatsinks for 490, 690, T5400, T7400 are also fully interchangeable.

0 Kudos
8 Krypton

RE: PN for the primary heatsink in a T7500?

Hi 🙂

I hope this will be enough 😉

Cheers 🙂

0 Kudos
8 Krypton

RE: PN for the primary heatsink in a T7500?

Hi,

Quick question - what version of the BIOS should I install for x5650 ??

Thanks

Tags (1)
0 Kudos
mixmansc
1 Nickel

RE: PN for the primary heatsink in a T7500?

Oddly this still seems to be somewhat unanswered. I also am looking for an answer to this. My own digging around turns up 3 different heat sinks for the primary cpu. One solid aluminum and 2 copper/aluminum/heatpipe models. My guess is the actual specified heatsink is dependent on the processor installed. Some of the higher powered processors run much hotter then some of the lower power ones. The lowest power 5600 series Xeon processors only have a TDP of 40w while the 2 fastest have a whopping 130 TDP! My best guess is the solid aluminum heatsink is intended for the lower range (L5609, L5618, etc) 40w and 60w processors. The middle heatsink is probably intended for the middle range 80w processors. Finally the largest of the heatsinks is probably specified for the hottest of the 5600 series processors (the fastest quad and hex core models) running at 95w and 130w. The 3 model heatsinks I've run across are T012F - Solid aluminum one U016F - mid height aluminum/copper/heatpipe one U402F - tallest aluminum/copper/heatpipe one (this one does stick up into the 4 holes in the black plastic shroud)
0 Kudos