1 Copper

Re: Power Adapter Error message & Battery Not charging!

thanks to the chap that pointed out the plug has 3 wires not two, I stripped apart the plug and made good the problem..then using an old trick to kick start the 6 cells inside the battery pack which are wired in 3 pairs, the charge system now detects the batteries. before they had fully discharged causing little to no charge current being drawn ,hence causing the charging system to switch off. ie green charge light on for 5 seconds, then 4 orange pulses which repeats. would go into better details which would result in this post being removed again.






0 Kudos