Dell XPS 13 L322X Carbon Fiber Base Not Flat
I recently acquired a new XPS 13 L322X, and while it is certainly a beautiful machine, I've noticed that the front left corner does not make contact with the surface below it. As a result, the laptop rocks back and forth slightly between the front left and rear right corners as I use it. I thought it might have just been the table I had it on at the time, but after trying multiple tables (and an inspection grade surface plate), the problem persisted. I tried slipping a piece of paper underneath the chassis from all four corners and there was a definite gap at the front left while there was none at the other three corners. Anyone else notice this defect? I'm a quality engineer by trade, and frankly I'm surprised Dell would let something like this get out the door.