Moderator
Moderator

Re: P2715Q, Alienware X51-R1, GeForce GTX 1060 FE, Entering PSM

 

* Turn the X51-R1 off
* Turn the P2715Q off
* Disconnect every cable (including the power cable) from the P2715Q
* Press and hold in the P2715Q power button for 10 seconds

* Disconnect the power cable and all monitor cables from the X51-R1
* Open the X51-R1 case cover
* Remove the GeForce GTX 1060 from the X51-R1
* Use a can of compressed air and blow out all of the dust on/in the GeForce GTX 1060 and from inside the X51-R1
* Reinstall the GeForce GTX 1060 into the X51-R1
* Close the case cover
* Reconnect the P2715Q DP to mDP cable from the GeForce GTX 1060 DP out port to the P2715Q mDP in port
* Reconnect the power cable to the P2715Q
* Reconnect the power cable to the X51-R1
* Turn the P2715Q on
* Turn the X51-R1 on
* Press the P2715Q Input Source button, check mDP. What happens?

0 Kudos