Kashan Nawaz
1 Copper

RE: Bus 3 Device 0 Function 0 Integrated RAID

I replace Motherboard, then i face issue in Dell R710 when i connect my server to SAN through SAS cables then shows following error and also not show raid controller.

Bus 4 Device 0 function 0 slot 5

Bus 3 device 0 function 0 Integrated RAID

and when i remove NIC then it boots normally.

also i replaced NIC card and RAID controller but have same issue. Currently NIC card is newly installed and RAID controller is old.

BIOS and RAID controller firmware are updated.

I think it is due to conflict between NIC and sas cables or something help. 

0 Kudos