I have just replaced the system board in our Poweredge and when I try to boot the system cannot detect any of the 2 x 1T SAS drives. It only detects the NIC cards and the DVD drive. They were previously set as a RAID 1 I believe.
We have embedded RAID using the PERC S110. When enter the PERC BIOS (CTRL-R), no physical drives are listed (just the DVD drive). I'm pretty confident all the cables are connected properly; I'm not getting any errors on boot...
I've tried BIOS and UEFI boot both with no luck.
Any thoughts or things I can try?
Solved! Go to Solution.