1 Copper

R330 Poweredge SSD OS install outside of PERC

Hey everyone,

I have a R330 Poweredge server that has a PERC controller that's handling 4 drives in Raid 5.  That all is working great, but I want to have an SSD for an operating system and I want it outside of the PERC raid card, so I'll be using the on-board SATA connector.  

I've done all this and while I can see the drive attached, even using the Lifrecycle Install OS, I'm not able to use the drive for installation.  

The current RAID-5 is just blank, but setup in advance of OS install.  


0 Kudos