I had a motherboard problem before and got a new motheroard and a new ssd installed. Since then, I've been having that warning. Any help is appricated. it has been a few years, eveything work just fine but I keep having that annoying message. thanks.
Solved! Go to Solution.
Hi @rjnd ,
Seems like your T7500 installed with a LSI Logic SAS1068E-1R RAID card with no hard drive connected. Is your new SSD connected to the on-board SATA port only? If so, you may simply remove the RAID card.
Re: Precision T7500 - MTP boot room, no supported devices found
Yes, the ssd card is directly connected to data port. Looks like that is the answer. Thank you 🙂 One last question, after removing the card, should I uninstall or disable anything from bios? Thank you again.