Re: Re-Installation problems with AIO 964 on Vista 3300
Fix your wireless router first.
Update the firmware in your wireless router. Manufacturer's website, make & Model needed.
Broadcast SSID(You may want to change this to make it easier to connect)
Use WPA-PSK(TKIP) Security. Most wireless devices work best with this type of security.
Mixed b and g mode(n if available)
Use channels 1, 6 or 11. Most devices work better on these channels.
Save and exit. Power everything off for 30 seconds. Power everything back on, wait 30 seconds, now try to connect.
After router is done, now setup your wireless print server/printer.
Attach the 3300 to your computer using the USB Cable and insert the 3300 disk. Follow the instructions. It should ask you for the network ID, type of security and password.
Now for the printer. Download and run this patch to completely remove the printer from your computer.
Restart your computer.
Download the proper drivers.
Install the drivers, choose network, choose I'm using a wireless print server(if you do not see this, then choose add printer and you should see it then) and follow the instructions.
Scanning using USB connection, open the Dell All-In-One Center, click on scanning and copying and scan from there.
Scanning wirelessly, use the scan buttons on the printer.
Original poster, If you have solved your problem, can you please mark the correct thread(s) with your solution. Thanks
Welcome to Dell Community!
#MicrosoftMVP - Windows Expert-Consumer April 1, 2012 to March 31, 2015