8 Krypton

Re: Any Suggestions for installing 964 AIO printer after new harddrive



Follow these instructions and the printer should install for you. The patch MUST be run on Vista machines.


Download and run this patch to completely remove the printer from your computer. (This patch is like a cleaner and works on XP and Vista systems)


Restart your computer.


Download the proper drivers.


XP Drivers


Vista 32-bit Drivers


All other drivers


Vista 64-bit Drivers



Go to device manager(right click my computer, left click properties, left click hardware, left click device manager)


Go to the USB Controller section and click the + sign.


Starting at the bottom, USB Root Hubs, and working your way to the top, USB Universal Controllers, un-install everything in that section.


Restart your computer. Windows will find everything again and correct the problem one. Please be patient. The new hardware wizard may work 3-5 minutes before it's done.


Install the proper drivers. You'll be prompted when to connect your printer(powered on)


Please remember to install the latest firmware for the 964 printer.




Scanning using USB connection, open the Dell All-In-One Center, click on scanning and copying and scan from there.


Scanning wirelessly, use the scan buttons on the printer.





What is a Dell Service Tag and how do I locate it? 

Original poster, If you have solved your problem, can you please mark the correct thread(s) with your solution. Thanks 

Welcome to Dell Community!

#DellWorld 2012

#DellWorld 2015

#DellEMCWorld 2016

#MicrosoftMVP - Windows Expert-Consumer April 1, 2012 to March 31, 2015

0 Kudos