cdntekkie
6 Indium

Re: Unable to boot to utility partition on VNX5300, help!

The system is reimaged... SPa boots up fine now.

In the end I needed to use SPb to run the utility partition to do the reimage.

0 Kudos
encry
1 Nickel

Re: Unable to boot to utility partition on VNX5300, help!

How long did it take to reimage your system? did you connect via the serial port on SPB to initialize the reimage on both storage processors? i think ive seen somewhere that you do the reimage with only one SP in the system....

0 Kudos
cdntekkie
6 Indium

Re: Unable to boot to utility partition on VNX5300, help!

It takes about 45 minutes, you should only have one SP seated while reimaging. They both connect to the same vault disks so once the first one is working and you can connect to it via unisphere then you can reseat the second storage processor and itll boot up and update on its own.

0 Kudos
cdntekkie
6 Indium

Re: Unable to boot to utility partition on VNX5300, help!

it wont let me pm you for some reason, shoot me your email somehow so we can stop spamming these folks lol.

0 Kudos
encry
1 Nickel

Re: Unable to boot to utility partition on VNX5300, help!

<Email id removed>

0 Kudos
prepaid143
1 Copper

Re: Unable to boot to utility partition on VNX5300, help!

Try to reboot system and then check. may be work it.<Non public info removed>

0 Kudos
andrewpiana
1 Copper

Re: Unable to boot to utility partition on VNX5300, help!


@Maklai wrote:

Hello,

Are you getting this error while connected to SPA or SPB?

When you get that error how long do you let it sit before you manually reboot your VNX5300?

prepaidgiftbalance dgcustomerfirst thesurveypedia


no not getting 

0 Kudos