admingirl
3 Silver

Adding a 8 GB line card

Hello,

Slots 8/9 are currently empty on my MDS 9509's. I need to add an additional 8 GB line card. Can we do that as Non Disruptive FRU?

Many thanks in advance!

Admingirl

Labels (1)
0 Kudos
dynamox
6 Gallium

Re: Adding a 8 GB line card

please provide output from "show module" and "show hardware"   (scramble serial numbers)

admingirl
3 Silver

Re: Adding a 8 GB line card

Thank you Dynamox, will do that now.

0 Kudos
admingirl
3 Silver

Re: Adding a 8 GB line card

show module

Mod  Ports  Module-Type                         Model              Status

---  -----  ----------------------------------- ------------------ ----------

1    24     1/2/4 Gbps FC Module                DS-X9124           ok

2    24     1/2/4 Gbps FC Module                DS-X9124           ok

3    24     1/2/4 Gbps FC Module                DS-X9124           ok

4    24     1/2/4/8 Gbps FC Module              DS-X9224-96K9      ok

5    0      Supervisor/Fabric-2                 DS-X9530-SF2-K9    active *

6    0      Supervisor/Fabric-2                 DS-X9530-SF2-K9    ha-standby

7    22     4x1GE IPS, 18x1/2/4Gbps FC Module   DS-X9304-18K9      ok

Mod  Sw              Hw      World-Wide-Name(s) (WWN)

---  --------------  ------  --------------------------------------------------

1    5.2(6a)         1.7     20:01:00:0d:ec:a0:ba:c0 to 20:18:00:0d:ec:a0:ba:c0

2    5.2(6a)         1.7     20:41:00:0d:ec:a0:ba:c0 to 20:58:00:0d:ec:a0:ba:c0

3    5.2(6a)         1.7     20:81:00:0d:ec:a0:ba:c0 to 20:98:00:0d:ec:a0:ba:c0

4    5.2(6a)         1.6     20:c1:00:0d:ec:a0:ba:c0 to 20:d8:00:0d:ec:a0:ba:c0

5    5.2(6a)         1.6     --

6    5.2(6a)         1.6     --

7    5.2(6a)         1.4     21:81:00:0d:ec:a0:ba:c0 to 21:92:00:0d:ec:a0:ba:c0

Mod  MAC-Address(es)                         Serial-Num

---  --------------------------------------  ----------

1    00-13-80-a8-c9-78 to 00-13-80-a8-c9-7c 

2    00-13-80-a8-ca-8c to 00-13-80-a8-ca-90 

3    00-13-80-a8-c9-0c to 00-13-80-a8-c9-10 

4    c8-4c-75-b1-28-54 to c8-4c-75-b1-28-58 

5    00-19-e7-a8-4d-c8 to 00-19-e7-a8-4d-cc 

6    00-19-e7-a8-4d-9c to 00-19-e7-a8-4d-a0 

7    00-23-eb-4f-0d-20 to 00-23-eb-4f-0d-28 

0 Kudos
dynamox
6 Gallium

Re: Adding a 8 GB line card

is the new module the same model as in slot 4 ?

admingirl
3 Silver

Re: Adding a 8 GB line card

Yes it is.

0 Kudos
dynamox
6 Gallium

Re: Adding a 8 GB line card

should be fine then, take switch backup, ground yourself to the switch itself and gently slide the blade inside . It will take a couple of minutes to boot up (it might need to be either upgraded or downgraded to match the current version on the switch ..it will happen automatically), whole process is non-disruptive process.

0 Kudos
admingirl
3 Silver

Re: Adding a 8 GB line card

Awesome!!! Thanks so much Dynamox!

0 Kudos
dynamox
6 Gallium

Re: Adding a 8 GB line card

no worries.