SKT2
3 Zinc

symdev show and powermt display dev=

root [/root] symdev -sid xxx show 0DF9

Device Physical Name : Not Visible

Front Director Paths (2):
{
----------------------------------------------------------------------
POWERPATH DIRECTOR PORT LUN
--------- ---------- ---- -------- ---------
PdevName Type Type Num Sts VBUS TID SYMM Host
----------------------------------------------------------------------
Not Visible N/A FA 07B:1 RW 000 0D 001 N/A
Not Visible N/A FA 10B:1 RW 000 0D 001 N/A
}


:root [/root] powermt display dev=c104t9d0
Symmetrix ID=xxxxxxxxxxx
Logical device ID=0BA8
state=alive; policy=SymmOpt; priority=0; queued-IOs=0
==============================================================================
---------------- Host --------------- - Stor - -- I/O Path - -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
104 1/0/8/0/0.101.18.19.0.9.0 c104t9d0 FA 7aB active alive 0 0
106 0/0/8/0/0.99.18.19.0.9.0 c106t9d0 FA 10aB active alive 0 0



I am trying these two commands in multiple LUNs and i see that symdev reports invisible. But powermt display prove that device is visible.

Is this normal? On another when tried the masked device showing visible by symdev command.
Tags (2)
0 Kudos