n4tty's Posts

n4tty's Posts

Pocket Companion Windows 7 Login problems Hi I've been testing the Pocket cloud trail version with Windows Vista & have now switched to Windows 7. When try to log in to Windows 7 from my Android... See more...
Pocket Companion Windows 7 Login problems Hi I've been testing the Pocket cloud trail version with Windows Vista & have now switched to Windows 7. When try to log in to Windows 7 from my Android phone, I'm presented with the Windows 7 log in screen. Upon log in, Pocket Cloud will then log my pc out in order to log in via my Android phone. Where as with Vista I was able to log in to my desktop from my Android phone without Pocket cloud logging off the PC first. Is it possible to achieve the same kind of connection I used with Vista in the Windows 7 version of Pocket Companion? Tia
Thanks all I can say is Artic Silver 5 "ROCKS"
Can someone please tell me if I can use the following memory type in my XPS 420 Q6600? DDR3-800 SDRAM, DDR3-1066 SDRAM, DDR3-1333 SDRAM According to the following info I've found on the net I c... See more...
Can someone please tell me if I can use the following memory type in my XPS 420 Q6600? DDR3-800 SDRAM, DDR3-1066 SDRAM, DDR3-1333 SDRAM According to the following info I've found on the net I can but I would like confirmation of this data before I purchase any ram. Dell XPS 420 up to 8 GB or DDR3 - 1333 SDRAM see below Field Value North Bridge Properties North Bridge Intel Beachwood X38 Supported FSB Speeds FSB800, FSB1066, FSB1333 Supported Memory Types DDR2-667 SDRAM, DDR2-800 SDRAM, DDR3-800 SDRAM, DDR3-1066 SDRAM, DDR3-1333 SDRAM Maximum Memory Amount 8 GB Revision / Stepping 00 / A0 Package Type 1300 Pin FC-BGA Package Size 4.0 cm x 4.0 cm Core Voltage 1.25 V In-Order Queue Depth 12 PCI Express Controller PCI-E 2.0 x16 port #2 In Use @ x16 (Leadtek WinFast PX8800 GTS TDH 640MB Video Adapter) PCI-E 2.0 x16 port #3 Empty Tia
Thank you.
Can anyone please tell me what is the best/fastest ram in MHz I can use in a XPS 420 Q6600 2.40 GHz 8MB 1066MHz? Can I use DDR3 or am I resticted to DDR2? Tia
I have a Dell XPS 420 Q6600 (stock) 4GB with 4x Samsung Spinpoint F3 1TB internal Hard Drives, a few external USB devices (all powered) + a Xenta 80plus Certified 800W Modular 13.5cm Fan PSU which wa... See more...
I have a Dell XPS 420 Q6600 (stock) 4GB with 4x Samsung Spinpoint F3 1TB internal Hard Drives, a few external USB devices (all powered) + a Xenta 80plus Certified 800W Modular 13.5cm Fan PSU which was running a XFX HD4770 connected to a 24" DVI monitor + Samsung 42" Plasma just fine. I've just upgraded my graphics card in to a XFX HD6870 (hd-687a-zddc). I upgraded as I want to add another 42" LCD HDTV in the bedroom to the setup & the card has a good cooling system from what I understand. Now as soon as I installed the new card, I noticed the CPU fan noise was going crazy in what is normally a very quiet setup so I checked the temps & found the CPU is now running @ a constant 91 degrees & the card @ 59 degrees under normal load. Can anyone recommend some extra cooling that would fit on the XPS x38 BTX motherboard to bring the temperatures and fan noise down? I have been offered a XPS 430 barebones which has a x48 motherboard as opposed to my current x38, does this case/board config have better cooling/noise prospects for the above system spec? Any advice would be greatly appreciated Tia