systemdose's Posts

systemdose's Posts

I think there is still a misunderstanding, or I dont know enough details about RAM to fully understand your reply. I did not meant to ask if dell will validate speeds that did not exist at the time... See more...
I think there is still a misunderstanding, or I dont know enough details about RAM to fully understand your reply. I did not meant to ask if dell will validate speeds that did not exist at the time of manufacture. my question is related to what RAM speeds (in MHz) they designed the motherboard to utilize. yes, I know that is FSB, but that is the only spec that I understand enough to be able to look for possible RAM modules to use in it. (without getting into more detail about RAM, such as timing and such) the motherboard I was using before using this dell says it supportsRAM modules up to 800MHz speed  (but in some cases will use special 1066MHz modules). the CPU FSB supported on that baord is up to 1333MHz. (this is why I was asking about speeds of the RAM) now the dell has a I5-2400 CPU which says Memory Types are 1066/1333MHz. if the optiplex 990 only supports Sandy Bridge CPUs then mas FSB is 1333MHz. (correct me if I am wrong here) ok, so here are more questions: if that is the case then the RAM that is used in this dell machine must meet the timings for the 1333MHz timings, no? now, if that is all true and based on what you mentioned in previous post then I could potentially use any RAM speeds as long as it meets the timing of  7 7 7  or  8 8 8  ? then that means max RAM speed (according to that table you gave) is DDR3 1600 that meet the 777 or 888 timing. am I correct on any of the conclusions above? thank you for your time!
I think there is a misunderstanding to what I am asking. my question is what is the maximum memory speed that the Dell Optiplex 990 system will be able to use? (i.e. DDR3  1600 -PC3 12800 ; DDR3-... See more...
I think there is a misunderstanding to what I am asking. my question is what is the maximum memory speed that the Dell Optiplex 990 system will be able to use? (i.e. DDR3  1600 -PC3 12800 ; DDR3-1866 -PC3-14900 ; etc) all the documentation I have seen lists the Ram as: 16GB1 DDR3, 1333MHz, (4 DIMM) 8GB1 DDR3, 1333MHz, (2 DIMM) ETC. (no other speed info is given from all the documents I have looked at) which is why I have this question. (optiplex-990-customer-brochure.pdf) I want to know all the possible memory speeds that the Optiplex 990 system will be able to use correctly with out causing systems issues. down-clocking the memory speed is another question that I did not mean to imply. now, since you mentioned down-clocking what is the maximum memory speed that the system is able to run at? (so I am not paying extra for faster modules but not using that speed) again I now have 2 questions: 1. all the possible memory speeds that the Dell Optiplex 990 system will be able to use without causing system errors? 2. maximum memory speed that the system is able to run at without causing system errors? I hope this is now clear what I am asking. thank you for your time
I have a optiplex 990 and I wanted to verify the supported memory speeds. all the documentation I have found only says DDR3, 1333MHz with up to 16GB with all 4 slots used. but when looking for comp... See more...
I have a optiplex 990 and I wanted to verify the supported memory speeds. all the documentation I have found only says DDR3, 1333MHz with up to 16GB with all 4 slots used. but when looking for compatible memory upgrades crucial.com lists DDR3 at 1600MHz. where can I find all the memory speeds that this machine supports?