javierbrath's Posts

javierbrath's Posts

follow the follow steeps use putty and extraputty. and at the steep 5 use xmoden to transfer the firmware to the switch. at the steep 9. e. upload again the firmware to it using ymoden. and thats ... See more...
follow the follow steeps use putty and extraputty. and at the steep 5 use xmoden to transfer the firmware to the switch. at the steep 9. e. upload again the firmware to it using ymoden. and thats it ( https://www.dell.com/community/Networking-General/Inadvertently-reformatted-N2048P/m-p/5125145#M3045... )
hi i have a dell N2048P. im follow all steeps but the switch doesn´t startup ?  
hi accidentally i´m Reformat and restore file system , i try the follow steeps ( https://www.dell.com/community/Networking-General/Inadvertently-reformatted-N2048P/m-p/5125145#M30453 ) but the swicth... See more...
hi accidentally i´m Reformat and restore file system , i try the follow steeps ( https://www.dell.com/community/Networking-General/Inadvertently-reformatted-N2048P/m-p/5125145#M30453 ) but the swicth isn´t boot and display the follow mesage Creating 1 MTD partitions on "nand0": 0x000000200000-0x00000f000000 : "mtd=4" /image2 not found! ubifsload - load file from an UBIFS filesystem Usage: ubifsload <addr> <filename> [bytes]     - load file 'filename' to address 'addr' Wrong Image Format for bootm command ERROR: can't get kernel image! Saving Environment to NAND... Erasing Nand... Erasing at 0x160000 -- 100% complete. Writing to Nand... done /image1 not found! ubifsload - load file from an UBIFS filesystem Usage: ubifsload <addr> <filename> [bytes]     - load file 'filename' to address 'addr' Wrong Image Format for bootm command ERROR: can't get kernel image! u-boot>   can you send me the correct proces an images file.
hi accidentally i´m Reformat and restore file system , i try the follow steeps ( https://www.dell.com/community/Networking-General/Inadvertently-reformatted-N2048P/m-p/5125145#M30453 ) but the swicth... See more...
hi accidentally i´m Reformat and restore file system , i try the follow steeps ( https://www.dell.com/community/Networking-General/Inadvertently-reformatted-N2048P/m-p/5125145#M30453 ) but the swicth isn´t boot and display the follow mesage Creating 1 MTD partitions on "nand0": 0x000000200000-0x00000f000000 : "mtd=4" /image2 not found! ubifsload - load file from an UBIFS filesystem Usage: ubifsload <addr> <filename> [bytes]     - load file 'filename' to address 'addr' Wrong Image Format for bootm command ERROR: can't get kernel image! Saving Environment to NAND... Erasing Nand... Erasing at 0x160000 -- 100% complete. Writing to Nand... done /image1 not found! ubifsload - load file from an UBIFS filesystem Usage: ubifsload <addr> <filename> [bytes]     - load file 'filename' to address 'addr' Wrong Image Format for bootm command ERROR: can't get kernel image! u-boot>   can you send me the correct proces an images file. hi accidentally i´m Reformat and restore file system , i try the follow steeps ( https://www.dell.com/community/Networking-General/Inadvertently-reformatted-N2048P/m-p/5125145#M30453 ) but the swicth isn´t boot and display the follow mesage Creating 1 MTD partitions on "nand0": 0x000000200000-0x00000f000000 : "mtd=4" /image2 not found! ubifsload - load file from an UBIFS filesystem Usage: ubifsload <addr> <filename> [bytes]     - load file 'filename' to address 'addr' Wrong Image Format for bootm command ERROR: can't get kernel image! Saving Environment to NAND... Erasing Nand... Erasing at 0x160000 -- 100% complete. Writing to Nand... done /image1 not found! ubifsload - load file from an UBIFS filesystem Usage: ubifsload <addr> <filename> [bytes]     - load file 'filename' to address 'addr' Wrong Image Format for bootm command ERROR: can't get kernel image! u-boot>   can you send me the correct proces an images file.
hi accidentally i´m Reformat and restore file system , i try the follow steeps ( https://www.dell.com/community/Networking-General/Inadvertently-reformatted-N2048P/m-p/5125145#M30453 ) but the swicth... See more...
hi accidentally i´m Reformat and restore file system , i try the follow steeps ( https://www.dell.com/community/Networking-General/Inadvertently-reformatted-N2048P/m-p/5125145#M30453 ) but the swicth isn´t boot Creating 1 MTD partitions on "nand0": 0x000000200000-0x00000f000000 : "mtd=4" /image2 not found! ubifsload - load file from an UBIFS filesystem Usage: ubifsload <addr> <filename> [bytes]     - load file 'filename' to address 'addr' Wrong Image Format for bootm command ERROR: can't get kernel image! Saving Environment to NAND... Erasing Nand... Erasing at 0x160000 -- 100% complete. Writing to Nand... done /image1 not found! ubifsload - load file from an UBIFS filesystem Usage: ubifsload <addr> <filename> [bytes]     - load file 'filename' to address 'addr' Wrong Image Format for bootm command ERROR: can't get kernel image! u-boot>   can you send me the correct proces an images file.