Reply to Message

Reply to Message

View discussion in a popup

Replying to:
2 Iron

RE: cctk.exe --tpmactivation=activate does not work on any of my models

Can you run CCTK from a batch file and echo out the value of %errorlevel% because that should match an error code in the CCTK user manual that will explain more.

I've had success with this order using CCTK:
1. Update to the latest version of the BIOS that is available
2. Enable TPM
3. Reboot
4. Set BIOS password
5. Activate TPM and specify the BIOS password
6. Reboot

Make sure you don't interrupt the boot sequence when enabling and activating the TPM. In other words, enable/active and reboot and go straight into BIOS set up. Let it boot to the OS. Then reboot and check the BIOS screen.
0 Kudos