Reply to Message

Reply to Message

View discussion in a popup

Replying to:
Robert Clemens
1 Nickel

N3048 Switch Randomly Crashed

Have a fairly new Dell N3048 switch on our network. Had it for several months in production working just fine. Yesterday the thing randomly died with no external anomalies known. The device was powered off. We have two PSU's in the unit. A tech that investigated said one was on blowing warm air and the other was off. He found that odd as the room is quite chilled and the unit is always cool to the touch and blowing out cold air from the device. The switch is plugged into two separate backups systems.

Any ideas? Running 6.2.0.5

Logs pulled from the device (starts at bottom. sorry for the ordering)

Info May 28 19:09:25 CLI_WEB Configuration file <startup-config> read from flash!
Info May 28 19:09:24 CLI_WEB Configuration file <startup-config> read from flash!
Notice May 28 19:09:23 IP Added RPPI routing policy client ospf:0.
Notice May 28 19:09:23 TRAPMGR Unit 1 is the new stack master, Old stack master unit is 0
Info May 28 19:08:58 General Application Started (traceroute-0, ID = 12, PID = 1447
Notice May 28 19:08:58 General Administrative Command:app-start traceroute-0
Info May 28 19:08:57 General Application Started (ping-0, ID = 11, PID = 1436
Notice May 28 19:08:57 General Administrative Command:app-start ping-0
Info May 28 19:08:56 General Application Started (ospf-00, ID = 10, PID = 1364
Notice May 28 19:08:56 General Administrative Command:app-start ospf-00 0
Info May 28 19:08:56 General Application Started (vr-agent-0, ID = 9, PID = 1352
Notice May 28 19:08:56 General Administrative Command:app-start vr-agent-0
Info May 28 19:08:55 VR_AGENT initialized the clnt addr:/tmp/fpcvragent.00,family:1
Info May 28 19:08:55 UNITMGR StatusInit: init done
Alert May 28 19:08:54 SIM Switch was reset due to software initiated exit.
Critical May 28 19:08:54 General Event(0xaaaaaaaa)
Notice May 28 19:08:54 BSP BSP initialization complete, starting switch firmware.
Info May 28 19:08:53 DRIVER Configuring CPUTRANS RX
Info May 28 19:08:53 DRIVER Configuring CPUTRANS TX
Info May 28 19:08:53 DRIVER Adding BCM transport pointers
Notice May 28 19:08:48 General Booting with default SDM template Data Center - IPv4 and IPv6.
Info May 28 19:08:47 General Application Terminated (user.start, ID = 7, PID = 1142
Alert May 28 19:08:47 General Error 0 (0x0)
0 Kudos