Reply to Message

Reply to Message

View discussion in a popup

Replying to:
midget0706
1 Nickel

Re: N1108 Series -- "Uplink" ports do not forward

Hi Daniel,

So i did something interesting... 

I rebooted two switches to factory default, and set only the IP address and a couple of vlans to keep it simple

This is the config in two switches the same , IP 57 and 58  : :::: 

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

console>enable

console#show run

!Current Configuration:
!System Description "Dell EMC Networking N1108P-ON, 6.4.1.4, Linux 3.6.5"
!System Software Version 6.4.1.4
!
configure
vlan 2-3
exit
vlan 2
name "Vlan2"
exit
vlan 3
name "Vlan3"
exit
slot 1/0 2 ! Dell EMC Networking N1108P-ON
stack
member 1 2 ! N1108P-ON
exit
interface vlan 1
ip address 192.168.99.57 255.255.255.0
exit
username "admin" password dce0dd972055a72af7c14fd7310c5a98 privilege 15 encrypted
application install SupportAssist auto-restart start-on-boot
snmp-server engineid local 800002a203e4f0044c896c
exit

 <<<<<<<<<<<<<<<<<<<

I plug PC into port 57/1

i plug link cable from port 57/8 to 58/8  -- can ping 57 and 58 no problems

i plug link cable from port 57/9 to 58/9 - can ping 57 ok, cannot ping 58

For some reason, the uplink port is being treated differently, even though the config is the same

Going in to the web admin, all ports 1-12 are untagged VLAN1

**bleep** ?

0 Kudos