Reply to Message

Reply to Message

View discussion in a popup

Replying to:
javierbrath
1 Nickel

RE: Inadvertently reformatted N2048P

hi accidentally i´m Reformat and restore file system , i try the follow steeps ( https://www.dell.com/community/Networking-General/Inadvertently-reformatted-N2048P/m-p/5125145#M3045... ) but the swicth isn´t boot

and display the follow mesage

Creating 1 MTD partitions on "nand0":
0x000000200000-0x00000f000000 : "mtd=4"
/image2 not found!
ubifsload - load file from an UBIFS filesystem

Usage:
ubifsload <addr> <filename> [bytes]
    - load file 'filename' to address 'addr'
Wrong Image Format for bootm command
ERROR: can't get kernel image!
Saving Environment to NAND...
Erasing Nand...
Erasing at 0x160000 -- 100% complete.
Writing to Nand... done
/image1 not found!
ubifsload - load file from an UBIFS filesystem

Usage:
ubifsload <addr> <filename> [bytes]
    - load file 'filename' to address 'addr'
Wrong Image Format for bootm command
ERROR: can't get kernel image!
u-boot>

 

can you send me the correct proces an images file.

hi accidentally i´m Reformat and restore file system , i try the follow steeps ( https://www.dell.com/community/Networking-General/Inadvertently-reformatted-N2048P/m-p/5125145#M3045... ) but the swicth isn´t boot

and display the follow mesage

Creating 1 MTD partitions on "nand0":
0x000000200000-0x00000f000000 : "mtd=4"
/image2 not found!
ubifsload - load file from an UBIFS filesystem

Usage:
ubifsload <addr> <filename> [bytes]
    - load file 'filename' to address 'addr'
Wrong Image Format for bootm command
ERROR: can't get kernel image!
Saving Environment to NAND...
Erasing Nand...
Erasing at 0x160000 -- 100% complete.
Writing to Nand... done
/image1 not found!
ubifsload - load file from an UBIFS filesystem

Usage:
ubifsload <addr> <filename> [bytes]
    - load file 'filename' to address 'addr'
Wrong Image Format for bootm command
ERROR: can't get kernel image!
u-boot>

 

can you send me the correct proces an images file.

0 Kudos