Reply to Message

Reply to Message

View discussion in a popup

Replying to:
Scott Hanson
3 Argentium

RE: Power Supply for the PE2850 & PE1850

Each of those servers has redundant switch power supplies. Typically a rack will have a PDU that then legs out to smaller PDUs where the servers power supplies connect.

You typically wire a rack with 2 legs of 230V power and plug a supply from each server into each leg, so you can lose a leg and still be up.

Here's an older doc, but the architecture has not changed -- http://www.dell.com/downloads/global/products/pedge/en/rapidpower_bestpractices.doc

Hope that helps !
0 Kudos