Reply to Message

Reply to Message

View discussion in a popup

Replying to:
Moderator
Moderator

RE: Poweredge r420 replaced sysboard- now cannot see both SAS drives

system cannot detect any of the 2 x 1T SAS drives.

One other thing, I'm assuming that this is a typo. These are SATA drives, correct? You stated that these drives were working previously in a RAID 1 in the same configuration. The S110 is a SATA controller, it does not support SAS.

Thanks

Daniel Mysinger
Dell EMC, Enterprise Engineer

Get support on Twitter @DellCaresPRO

0 Kudos