原机的主板断电后加电报错为:1、System Board PF ault Fail Safe:Voltage sensor for System Board,state asserted was asserted.
2、VR PG:Voltage sensor,state asserted was asserted.
换上新的主板后报错代码为(新主板是经过测试的完好的主板):
E1000 Failsafe voltage error.Contact support.
E1219 Disk Backplane power failur.Check BP power cable.
怀疑可能存才除主板外其他故障,请各位大神帮忙想想办法,拜谢.