Reply to Message

Reply to Message

View discussion in a popup

Replying to:

Re: iDRAC problem on Dell R610

Actually, the iDRAC 6 Express does have a web interface.  Go into the Ctrl+E setup utility during POST, reset it to factory defaults, then give it a unique static IP address that is in your normal subnet.  Try it with IE7 or 8, and see if it responds.  If not, then shut down the server, unplug all external cables, then drain flea power by holding in the power button for 10 seconds.  Plug everything back in and crank it up, then check the settings in Ctrl+E and redo that step if necessary, then see if it works with a browser. 

0 Kudos