Search Results (156)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Relevance
Reassigning IP address PC5324
I am a beginner on configuring these PC5324's, I have only done what I
need to do with them. We run a seperate VLAN for voice to divide our traffic so
I configure that in but thats about the extent of my knowledge besides
assigning an IP and username and password. I was told by my boss
Question
•
Networking General
Trunking between PC6248 stack and PC5324
The end goal of my project is to set up guest internet on PC5324 port
g1 with a WAP on vlan 172 with no access to other vlans. Other ports on the
PC5324 will belong to vlan 11. As the first step I created a trunk on PC6248
port 1/g7 and added vlan 11 and 172. I created a trunk on PC5324
Question
•
Networking General
host can't ping pc 5324 but pc5324 can ping host
switches (cisco,hp,extreme) are ok. The problem is only with
powerconnects. In arp table in Linux, there isn't entry about pc5324, but in
bridge table in the pc5324 there is entry about linux. When i ping from pc5324
to linux, then the linux answer correct and since this moment, the host can
Question
•
Networking General
Community Accepted Solution
PC5324, 2013, AAA, FreeRadius: Broken
I'm trying to set up my Dell Powerconnect switches to use RADIUS
authentication for admins. The setup is a PC5324 with os 2.0.1.3 (I've also
tested 2.0.0.39 with same results). Freeradius is working properly for all of
my Cisco ASAs, switches and routers. I've followed the User guide (can
Question
•
Networking General
Closed
Memory Upgrade for M1530 from PC5300 to PC6400
Has anyone upgraded from PC5300 to PC6400? Did it show in BIOS as 667 mhtz or
800 mhz. I considering throwing in 4GB of 800mhtz to see if bios will read it
as 800 or if their is a bios limit from Dell on the M1530 and it will only run
at 667? Does anyone know or have tried this?
Question
•
Laptops General - Locked Topics
PC5324 IGMP Snooping & Windows NLB Cluster
Server 2003 Standard
Edition, in multicast mode with IGMP multicast support (PAY ATTENTION TO THIS).
All cluster servers are connected to 2 PC5324 switches. Now everything has been
done and it seems that the NLB cluster works well. The configuration details is
attached below:
Question
•
Networking General
PC5324 mib file ?
hi all,
i'm looking for latest mib file for managing my PC5324...but i'm
unable to find it..
any ideaa ?
Thansk a lot
PS : is there an unique place where i could
Question
•
Networking General
Vlans between PC5316M and PC6224
I need to configure Vlans between powerConnect 5316m in a Blade chasis , and a
powerConnect 6224. I need setup 3 Vlans , but i don´t need rooting between this
vlans . thks
Question
•
Networking General
PC5324 : latest mib ?
Hello all,
i'm looking for the latest mib for my Powerconnect 5324.
Any idea of where i could find this ?
thanks a lot
Florent
Question
•
Networking General
PC5316M switch is rebooting continuosly
Folks,
This is a very critical issue.
I have 2 PC5316M switches which sit on PowerEdge 1855 Chassis.
While upgrading the firmware,there seems to be a corruption. hence both the switches are continuously rebooting with a message
Question
•
Networking General
Connecting a PC2808 switch to a PC5324 switch in VLAN
All;
I have a PC5324 switch and I need to connect a PC2808 switch to it in a
particular VLAN that I already
set up. The VLAN is setup to use 3 ports. The first port is the uplink
to my router, the second is
connected to a computer, and the third is
Question
•
Networking General
Closed
is dell 1501 compatible with pc5300 memory modules?
I need a little answer to a question. are pc5300 memory modules
compatible with a dell 1501 running windows xp mce on amd turion x2 mobile
technology?
Question
•
Laptops General - Locked Topics
ITA & PC5324
I recently puchased two PC 5324 switches. On the devices and on ITA I
made sure that the SNMP communities were set correctly. ITA discovered the
switches no problem. But it shows them having a warning. When I check the Alert
Logs for the device, there is no warning event there. On the de
Question
•
Systems Management General
Closed
difference between PC5300 DDR2 and pc6400 DCR2 memory
i have a Inspiron E1505 and i am planing to upgrade to 2 GBs of
RAM what is the difference of 5300 and 6400 ram and if 6400 is
better can i use it in my comp
Question
•
Laptops General - Locked Topics
Ping loss between devices on PC5324
Hi, first time poster here and I am having an issue which I believe I
have narrowed down to the switch which has our servers are connected to.
The PowerConnect 5324 is managed and we have a VLAN setup on it. Below
I will post the running-config from the dev
Question
•
Networking General
PC5324 protocol groups / protocol VLAN bug
I'm running a small local WISP. I have a few of these switches bought
at auctions (allegro.pl - a bit like ebay), they generally work fine but I came
across a strange issue with a nice but rarely used feature: protocol groups /
VLANs.
The setup is fairly complex, but basica
Question
•
Networking General
Why wont DDR2 PC5300 work in PE2800 (Samsung 2GB 2Rx4 PC2-5300F-555-11-EO )
I bought Samsung 2GB 2Rx4 PC2-5300F-555-11-EO
they look like 240 pins but it seems the notch is different to the rams
i have already?
Have i bought the correct ram?
Question
•
PowerEdge Hardware General
Community Accepted Solution
Precision 690 won't use all available RAM
Hey guys, I have a Precision 690 (A08 bios, 2x dual core 2.3ghz Xeons) with the memory risers and 1KW PSU that was originally working with 4x2GB 2Rx4 PC5300F RAM for a total of 8GB. I have 8 sticks of Samsung 2GB 2Rx8 PC5300F RAM for a total of 16GB that I'm trying to put into this system but I can
Question
•
Desktops General - Locked Topics
Community Accepted Solution
Inspiron 530s, v-gen ram compatibility
V-gen ddr2 800 pc6400 2GB (1 piece) dual channel compatible with my
machine?
My specs: inspiron core2duo E4500, 2 pieces ddr2 667 pc5300 (2x1GB)
single channel, gpu: intel g33
Currently, slot 1 & 2 are used. I am planning to use slot 3 for the
new
Question
•
Inspiron Desktops
Dell Support Results
No Results found!