Search

When will Server 2016 be supported on the Powervault MD32? It has been released since October and has been available for testing since a long time.

I completed an job a few weeks ago of a 400 seat View implementation at a school district. This was slightly unusual for me because of the network setup. The equipment is setup in two separate rows of racks.  There are 4 vSphere servers, one Cisco 4948 and a core switch in each row.  The

I have a vostro 200 which was purchased in 2007 .. i want to know if my system has Wi-Fi connectivity or not?

I was trying to get this setup in a production environment however the procedure for redirected restore seems to be quite confusing. I have setup a lab environment and now trying to fully test it there. Got a networker 8.2.0 server with DD attached. 2 hosts both are Windows 2008 R2 OS and hav

Hi, In the description for SBUU it says: Dell Systems Build and Update Utility is a bootable utility for a single server Operating System install, pre-OS firmware updates and pre-OS system configuration. http://support.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&

it's also reporting that one of the controllers has a failed battery. have ordered a replacement battery. I get a strange error (no actual text) when I try to upgrade the firmware - I assume it will be this way until we have the battery situation sorted out? the array continues to appear to funct

I have a 600m with a crashed motherboard and want to buy a universal hard drive upgrade kit. I am out of town and do not have the computer with me.  Can anyone tell me if the 600m is SATA or PATA? Thanks K

I have a dell deminsion xps gen3 desktop that i have been trying to repair using the windows install disk. whenever i get to the screen that says enter an 'r' to repair the keyboard is not being recognized.  I have watched it on several attempts and it stays available until it bring up that pa

I am very new to the server envionment so please bear with me. I "inherited" a pre-configured 840 with 2MB of memory installed and running Windows Server 2003. I want to replace the OS with Windows Home Server since the current WS 2003 config is really overkill for me. The problem I am having is th

Hello, I am beating my head against the computer trying to understand why I can't "Add New Programs" into my Dell 4600 w/ Windows XP. Everytime I try to install a CD program I get the same error.   NTVDM.EXE - Application Error The applicatio

I use Promise Ultra ATA cards in both of my 8400s. On one of those system I had to replace a storage drive and decided to go with on onboard SATA [drive I replaced had been on the card]. Since this switch opened up a spot on the ATA card I moved one of the DVD drives to the card [had been on the mob

Recently I inadvertently held down the right shift key for several seconds. The result was a screen asking me questions about "sticky key".  Since I had no idea what it was talking about, I did nothing.  Now, each time I reboot my computer the keyboard is locked.  I can get it workin

  My computer is froze on the desktop. The cursor is not showing up on the screen and the keyboard is not working. It is the computer that runs the network at my house and I am using my laptop to post this message through the stuck computer's internet connection.   

Got a new UltraSharp 2007WFP. It is running at 1650X1028 at 60hz and the text clarity is very disappointing.  All the diagonal lines you can count the dots and the same is true of any letter with curves.  This makes the text look fuzzy.  The latest 2007WFP drivers have been installed

Hello Dell and world, Currently I have a PERC 6/i on PE2950 with a failed HDD and replaced with HDD that shows up as FOREIGN [The drive arrived as new and I would like to clear to use for RAID5 rebuilt] Here are the links to screenshots of DELL OMSA with issues shown: PIC1: PIC2: PIC3: PI

I have a Dell Dimension 4700 running Windows XP and the latest (?) -- A10 -- version of BIOS. I tried to upgrade my memory by inserting four 1 Gig memory cards in all four slots. Two of the slots (numbers 1 and 3) have white clips on them and the other two (2 and 4) have black clips. When I insert t