Search Results (10K)
Conversation Type :
All
Selected All
Published Date :
Lifetime
Selected Lifetime
Relevance
Selected Relevance
com ports
I installed a lava d serial pci board, the computer gave them adresses of com
5 and com 6 the hardware i have needs them changed to comm 3 and com 4 how do i
do this
Question
•
Locked Topics – Desktops General
Com Ports
I have an Optiplex GX270 with WinXP Pro. I have installed Palm Desktop
and use a USB cable to HotSync. It uses com port 1, which happens to be the
only com port showing in Device Manager. Setup shows serial port one as com
port 3 but since I use a USB cable, it doesn't help.
̴
Question
•
Storage, Drives & Media
Closed
COM Port
Does the Inspiron have a physical COM port (DB9)? I'm considering buying
one, but I need COM connectivity and don't see a port on the "tour" photos.
Question
•
Locked Topics – Laptops General
com ports
I have a 610 laptop and need to use a usb device with the lap top. I
have the cables and software with the device but to my dismay the software on
the dell don't see the device.....On top of this the software that I was given
for the device only goes from com 1 to com 4......How do I rela
Question
•
Locked Topics – Laptops General
Server with COM-ports
Good day,
Please help me: I need server with COM-port, like to PowerEdge R210 II,
but it have 1 COM-port (?). What solution in future, if COM-port will damage?
It (or other) server exists with 2 (or more) COM-ports?
Thanks
Question
•
PowerEdge Hardware General
Closed
Laptop Com Port?
I have an external device that wants to connect with the software via a
Com Port. On the back of the laptop there isn't a com port (9 or 25 pin
connector), yet the internal modem uses a com port, right? I would think there
is an easy way to get to a com port, but I can't find any referenc
Question
•
Locked Topics – Laptops General
com ports
I have a new 4100C and need to have a com port. How can I add this and
not invalidate the warranty?
Question
•
Locked Topics – Desktops General
no com ports?
I have a new 4600c and I just realized there are no com ports. is it me? if
so, duhhh what do I do?
Question
•
Locked Topics – Desktops General
Closed
Com Port 1
I have a loader that is set to com port 1 and when i try to make it
communicate it tells me com port failed. I have gone in the boot up menu too
make sure it is set to com port 1 and also in the device manager but for some
reason it will not allow connection.
IS there anyon
Question
•
Locked Topics – Laptops General
Dell Support Results
No Results found!